I'm trying to install an Elastix 2.0 with a a800p and a g400p. So far, I am able to install those cards separately (using one PBX for each card). The problem is when I try to install those in the same server. I think the problem is when I install the chan-extra features, because just after it, I got the above error from the dahdi_genconf application (in a new elastix install, it work perfectly).
dahdi_genconf -vvvvvv
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/system.conf Failed probing type for channel 1 at /usr/lib/perl5/site_perl/5.8.8/Dahdi/Config/Gen/System.pm line 239
I finally intalled both cards and those are woking now, but there is an strange bug when I restart the server (using reboot at the command line).
When I start the server, the G400P is able to get up all the span with GSM SIM card (I am using one so far), but when I reboot the server, It is not able to get up the Spans, so I have to halt the system and start again.
gsm show spans output when I start the server
VOIPGSM*CLI> gsm show span 1
D-channel: 2
Status: Provisioned, Up, Active
Switchtype: SimCom 100/300
Type: CPE
Network Status: Roaming Net
Network Name: 123
Net Coverage (0,31): 14
gsm show spans output when I reboot the server
VOIPGSM*CLI> gsm show span 1
D-channel: 2
Status: Provisioned, Down, Active
Switchtype: SimCom 100/300
Type: CPE
Network Status: Unregistered
Network Name:
Net Coverage (0,31): -1