keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about G400/G410 Cards.

Unable to send SMS from console...

14 years 1 month ago #5047 by vmiro
When I try to send SMS using this command from console:
gsm send sms 1 065655XXXX "Text message"

I'm getting the following error:
WARNING[2685]: chan_dahdi.c:9260 dahdi_gsm_error: GSM 3: error sending sms (+CMS ERROR: PS busy)


What is PS?

Thanks
mIRO
14 years 1 month ago #5048 by Denins.Den
what version of dahdi did you use? I think the right command is
sebi send sms 1 xxxxx "Text message"
Did you use the dahdi which contain the sebi? You should download from here: www.odicha.net/downloads/svn/sebi-dev/

dahdi-linux-2.2.0.2/
dahdi-tools-2.2.0/
libpri-1.4.10.2/
libsebi-0.1/
trunk-asterisk/
14 years 1 month ago #5049 by vmiro
opvx-bristuff-0.4.0-RC3h.tar.gz is installed, I think it's Zaptel 1.4.12.1.
14 years 1 month ago #5059 by james.zhu
hello:
please send ssh to us.

14 years 1 month ago #5068 by vmiro
Unfortunately that's impossible, GSM GW is installed inside the server room of the bank, only access I have is physical, IT stuff won't let me a VPN access...
BTW call quality is excellent with this card, compared to bank's old GSM gateway :)

Is it possible to check the signal level somehow?

Thanks
mIRO
14 years 1 month ago #5069 by james.zhu
hi:
the problem looks the channel still busy and not released when you send sms. to debug that,
please: modprobe opvxg4xx debug=10 when loading the driver and open error and debug in asterisk logger.conf.

Time to create page: 0.038 seconds
Powered by Kunena Forum