Hello everyone
I'm installing a dgw-l20x that should stablish a communication between a SIP TRK (carrier) and a MFC R2.
The thing is that when I make a call from the carrier to the MFC, the call does not stablish and when I check the logs it says "outgoing call proceeding" but it should be an incoming call. Furthermore, when I try to make a call to the carrier, the OPENVOX only sends the first 4 dialed digits to the network. I assume that is because the DNIS is set to be receiving 4 digits. So , i guess that I need to flip the direction of the call making / call receiving on the Openvox.
I'm new to this R2 config so I'm open to any recommendations.
P.S.: I attach the log from the MFCR2 on the Openvox
