×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
B100/200/400/800 Series
B100E not work on freepbx + debian 9.4
×
Questions about B100/200/400/800 ISDN BRI Cards
B100E not work on freepbx + debian 9.4
Less
More
Posts: 13
Thank you received: 0
4 years 11 months ago #12075
by florent
Hello
I ve installed B100E on PCie
It's detected physical
06:00.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02)
Subsystem: Cologne Chip Designs GmbH ISDN Board
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 3000 [disabled] [size=8]
Region 1: Memory at d3100000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: hfcpci
Kernel modules: hfcpci, zaphfc
On the doc openvox dahdi, I've installed openvox dahdi ...no error
but no configuration span
but still no mistake...but no card
it's the last version current dahdi openvox installed
Have you a idea please?
thanks
Less
More
Posts: 104
Thank you received: 10
4 years 11 months ago #12076
by Dario.hu
hi florent,
edit /etc/modprobe.d/dahdi_blacklist.conf (if have no this file, you can find other files with same functions ), add blacklist hfcpci. after done it, reboot server.
if still have problem ,you can add my skype:dario.hu2 and prepare teamview for check.
The following user(s) said Thank You:
florent
Less
More
Posts: 13
Thank you received: 0
4 years 11 months ago #12083
by florent
big thanks
the card works very well
Less
More
Posts: 13
Thank you received: 0
4 years 11 months ago #12092
by florent
sorry but i have a new problem.
After reboot PC, the configuration is deleted
I must make a new dahdi_gen for rewrite file dahdi-channel, also it is a blank file
Have you a idea?
thanks
Less
More
Posts: 104
Thank you received: 10
4 years 11 months ago #12093
by Dario.hu
is dahdi-channels.conf can config via web interface? contact my skype
Less
More
Posts: 13
Thank you received: 0
4 years 11 months ago #12115
by florent
finally I made a script that corrects the problem and it works
For dahdi conf I don't use web interface
thanks
Forum
Telephony Cards Support
B100/200/400/800 Series
B100E not work on freepbx + debian 9.4
Time to create page: 0.036 seconds