B400E/Elastix/DAHDI incoming problem

Hello all,

I have the new Elastix 2.0 installed on the server and everything seems ok. Dahdi recognised and configured correct the B400E.
I am able to place outgoing calls but no Incoming calls. I checked everything i could think about but the problem is still there.

I enabled the pri debug on all the spans and i can see that there is activity when there is an incoming call but still nothing on the asterisk side.

Could somebody help?

Thanks

These are the messages from the pri intense debug 1

Enabled debugging on span 1
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 02 ff 03 08 01 45 05 a1 04 03 80 90 a3 18 01 89 6c 0c 01 83 36 39 33 32 33 36 33 31 36 33 70 0b a1 32 33 31 30 32 35 38 32 36 30 ]

< Unnumbered frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 127 EA: 1
< M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
< 40 bytes of data
Handling message for SAPI/TEI=0/127
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 89 73 ]

< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 068 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/68
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 8b 73 ]

< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 069 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/69
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 89 01 02 ]

< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 068 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 001 P/F: 0
< 0 bytes of data
Handling message for SAPI/TEI=0/68
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 8b 01 02 ]

< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 069 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 001 P/F: 0
< 0 bytes of data
Handling message for SAPI/TEI=0/69
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 8d 73 ]

< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 070 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/70
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 8f 73 ]

< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 071 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/71
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 8d 01 02 ]

< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 070 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 001 P/F: 0
< 0 bytes of data
Handling message for SAPI/TEI=0/70
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 8f 01 02 ]
idialler*CLI>
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 071 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 001 P/F: 0
< 0 bytes of data
Handling message for SAPI/TEI=0/71
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0
idialler*CLI>
< [ 02 8b 00 02 08 01 45 4d 08 02 80 90 ]
idialler*CLI>
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 069 EA: 1
< N(S): 000 0: 0
< N(R): 001 P: 0
< 8 bytes of data
Handling message for SAPI/TEI=0/69
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 02 89 00 02 08 01 45 4d 08 02 80 90 ]

< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 068 EA: 1
< N(S): 000 0: 0
< N(R): 001 P: 0
< 8 bytes of data
Handling message for SAPI/TEI=0/68
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0
idialler*CLI>
< [ 00 8b 01 04 ]

< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 069 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 002 P/F: 0
< 0 bytes of data
Handling message for SAPI/TEI=0/69
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0
idialler*CLI>
< [ 00 89 01 04 ]
idialler*CLI>
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 068 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 002 P/F: 0
< 0 bytes of data
Handling message for SAPI/TEI=0/68
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0
idialler*CLI>
< [ 00 8d 73 ]

< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 070 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/70
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0
idialler*CLI>
< [ 00 8f 73 ]
idialler*CLI>
< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 071 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/71
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0

< [ 00 89 73 ]

< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 068 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/68
TEI: 0 State 4
V(S) 0 V(A) 0 V(R) 0
K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0
T200 0, N200 3, T203 0
idialler*CLI>
< [ 00 8b 73 ]

< Unnumbered frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 069 EA: 1
< M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
Handling message for SAPI/TEI=0/69

Hi,
1)please add the line "error => error " and enable the following lines in /etc/asterisk/logger.conf
error => error
debug => debug
;The DTMF log is very handy if you have issues with IVR's
dtmf => dtmf
console => notice,warning,error
console => notice,warning,error,debug
messages => notice,warning,error
2)restart asterisk
3) make a incomingcall
4)post the debug information on CLI console to here.

Hi Xin,

Thanks for your reply. Even though i enabled all the logging as you instructed when i was making an incoming call still there was no activity in astrerisk, no messages in the console, and only if i was enabling the pri intense i could see the incoming call activity.

I changed the signaling of the BRI to bri_cpe_mpt and now i can see the incoming call getting in the asterisk and following the context.

The ISDN Bri multipoint has to do with the S-Bus termination setting in the NT, right?

Hi,
yes, you are right.

i] Last edited by xin.liu at 2010-6-22 17:23 [/i

And since i need the BRI to connect just to the card, i have to change the NT termination setting and then change the configuration to point-to-point, right?

Thanks.