A2410P don'T detect installed module

Hi all

I have a ELX3000 (Elastix appliance) with a A2410P with 6 FXO modules installed (installed by Elastix staff)
In web interface, when I use "Hardware detector" menu. There are nothing.

In /var/log/message, I have this :
Jul 31 11:14:04 elastix kernel: dahdi: Version: 2.6.1
Jul 31 11:14:05 elastix kernel: OpenVox A2410P version: 1.4
Jul 31 11:14:07 elastix kernel: Module 0: Not installed
........
Jul 31 11:14:07 elastix kernel: Module 23: Not installed
Jul 31 11:14:07 elastix kernel: dahdi: disable_span: span 1
Jul 31 11:14:07 elastix kernel: opvxa24xx: probe of 0000:05:00.0 failed with error -5


I have try to reinstall drivers ( http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/releases/1.3.5/openvox_dahdi-linux-complete-2.6.1+2.6.1.tar.gz ), but nothing change.

Someone have an idea ?
Thanks you

Hello

First please make sure you have supplied power to A2410. If still not works,re-insert the card to PCI slot again or change another PCI slot.
Have a try. You can contact me by MSN This email address is being protected from spambots. You need JavaScript enabled to view it. or Skype upper.hua

Best regards
upper.hua

Power cable is connected
I have try all PCI slot (the board have 2 PCI)
Removed second PCI card (a network adapter)

still nothing

Hello

Please send E-mail about the SSH information to This email address is being protected from spambots. You need JavaScript enabled to view it. .Let me check it .

upper.hua

ok, I'm not at my office right now and the Elastix was currently not connect to the network.
I will send you information in the next 12 hours.