×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
Not working - A400P22
×
Questions about A400/800/1200 Analog Interface Card
Not working - A400P22
15 years 5 months ago #2244
by danndp
Hi my friends.....
I have some problems with my board A400P22 (2FXO - 2FXS). one of the FXO ports when i try to make a call sounds busy (busy tone) the other 3 ports simply don't work, i can stay there waiting for any tone, and nothing happens........here i will send informatio regarding my system and my files in order to get some important and usefull information:
[channels]
language=es
context=interno
;signaling=fxs_ks
;context=incoming-fxo
;callerid=Extension Zap <101>
;chanel => 1-2
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
;restrictcid=no
usecallingpres=yes
;sendcalleridafter=1
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
rxgain=0.0
txgain=0.0
immediate=no
#include zapata-channels.conf
zapata-channels:
; Autogenerated by ./genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
; Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1" (MASTER)
;;; line="1 WCTDM/0/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
context=default
;;; line="2 WCTDM/0/1"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
context=default
;;; line="3 WCTDM/0/2"
signalling=fxo_ks
callerid="Channel 3" <6003>
mailbox=6003
group=5
context=from-internal
channel => 3
callerid=
mailbox=
group=
context=default
;;; line="4 WCTDM/0/3"
signalling=fxo_ks
callerid="Channel 4" <6004>
mailbox=6004
group=5
context=from-internal
channel => 4
callerid=
mailbox:q
extensions.conf:
[from-internal]
exten => _9XXXXXXX,1,Dial(ZAP/1/g0/{EXTEN:1},40,r)
[from-pstn]
exten => _9XXXXXXXXXXX,1,Dial(zap/1/g0/{EXTEN:1},40,r)
zaptel.conf
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1" (MASTER)
fxsks=1
fxsks=2
fxoks=3
fxoks=4
# Global data
loadzone = us
defaultzone = us
Information about my system:
uname -a:
Linux MiaPbx.com 2.6.9-67.EL #1 Fri Nov 16 12:34:13 EST 2007 i686 athlon i386 GNU/Linux
asterisk -V:
Asterisk 1.4.21.1
ztcfg -vvvv:
Zaptel Version: 1.4.11
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
4 channels to configure.
Hope you can help me my friends
Best Regards
Danny Dias
Less
More
Posts: 4
Thank you received: 1
15 years 5 months ago #2250
by Denins.Den
hello, danndp
please send ssh to This email address is being protected from spambots. You need JavaScript enabled to view it. , we will see how to help.
Less
More
Posts: 4
Thank you received: 1
15 years 5 months ago #2252
by Denins.Den
I didn't get any email from you , please check it, thanks
15 years 5 months ago #2269
by danndp
hi my friend, please check your email.....
Forum
Telephony Cards Support
A400/800/1200 Series
Not working - A400P22
Time to create page: 0.039 seconds