×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
Various a1200p boards in the same asterisk machine
×
Questions about A400/800/1200 Analog Interface Card
Various a1200p boards in the same asterisk machine
17 years 6 months ago #114
by pedro.feu
Hello
I have two questions:
It is possible install two a1200p boards with 12 fxo modules each one in the same machine?
This works fine in asterisk?.
Thanks
17 years 6 months ago #115
by miaolin
Yes, you can install 4 pcs or even more A1200P in one pc, they will work fine with very low CPU load.
16 years 11 months ago #279
by licedey
Is there a DSP chipset on the a1200p card? Can it handle the load balance with QoS when there are several cards installed on same server?
16 years 11 months ago #283
by miaolin
A1200P do not have dsp chipset,
for the QOS, the server ( in fact the OS) will handle it automaticlly,
our driver support use several cards on same server.
Best
MiaoLin.
16 years 11 months ago #284
by licedey
169: 549710 IO-APIC-level wctdm
177: 751381 IO-APIC-level eth0, wctdm
185: 548342 IO-APIC-level wctdm
I installed three cards, one card is sharing same irq with lan card. Will it cause a problem when on voice quality when the card uses the same irq with other devices? If so, how to fix it?
16 years 11 months ago #285
by miaolin
you have 2 method to change the irq that used by the card:
1. set irq in bios, such feature just supported by certain m/b.
2. use another pci slot.
share irq with lan will not always cause issue , it depends on h/w and s/w.
Forum
Telephony Cards Support
A400/800/1200 Series
Various a1200p boards in the same asterisk machine
Time to create page: 0.050 seconds