×
Notice
The forum is in read only mode.
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
A1200P busy detection problem
×
Questions about A400/800/1200 Analog Interface Card
A1200P busy detection problem
-
-
Topic Author
-
Visitor
-
17 years 10 months ago #66
by
Dear developers!
I've got trouble detecting busy tones on A1200P card. Actually, it doesn't work. My zapata.conf is the following:
context=incoming
usecallerid=no
hidecallerid=no
immediate=no
busydetect=yes
busycount=3
callprogress=no
callerid=gorod <1>
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
context=incoming
group=1
channel => 1-2
I am running Asterisk-1.2.9.1, libpri 1.2.3, zapata 1.0.1, zaptel 1.2.6, vanilla linux kernel 2.6.16.18.
Any ideas?
Thanks.
-
-
Topic Author
-
Visitor
-
17 years 10 months ago #67
by
A very valuable remark: busy detection DOES work with A100P (single FXO) card.
17 years 10 months ago #68
by miaolin
callprogress=no
you should change this line to
callprogress=yes
-
-
Topic Author
-
Visitor
-
17 years 10 months ago #84
by
can you try in your zapata.conf with:
busydetect=yes
busycount=6
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
A1200P busy detection problem
Time to create page: 0.052 seconds