keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A400/800/1200 Analog Interface Card

Openvox A400P ver 5.0 FreeBSD 9.1

11 years 2 weeks ago #8747 by zentarim
Good Day!
I have successfully used the card Openvox A400P ver 5.0 with 1 FXO and 1 FXS modules in FreeBSD 8.2 RELEASE
I used packages:
dahdi-2.4.0rc5_5
and
dahdi-kmod-2.4.0rc5

But recently I switched to FreeBSD 9.1-RELEASE. Now i am tried to use
dahdi-2.4.0rc5_6
and
dahdi-kmod26-2.6.1.r10738 (i have also tried dahdi-kmod-2.4.0rc5_6)

and when the module wctdm is loaded i get the following error:
"device_attach: wctdm0 attach returned 22"

pciconf -lv output:
none1@pci0:3:0:0:
class=0x078000 card=0x0003b100 chip=0x0001e159 rev=0x00 hdr=0x00
vendor = 'Tiger Jet Network Inc.'
device = 'Tiger3XX Modem/ISDN interface'
class = simple comms

Please help. I am ready to provide all the necessary information and SSH access (if required)
Thanks in advance.
Time to create page: 0.038 seconds
Powered by Kunena Forum