Hardware reference manual

Hallo Forum,
I have recently purchased a A800E card with one FXS and one FXO. Unfortunatly I seem to be unable to find a hardware reference manual that details the card: What I am most interested in is whether there is a possibility to connect (external) LEDs to the board to provide call status information. There seems to be a jumper block on the card, but I don't know what that's for.

The same question arises for a G400E with one GSM module - but I will post an equivalent question in the appropriate section of the forum.

Thanks and best regards,

Atom2

Hi Atom2

Our card A800E does not support to connect a LED for showing the call status.The jumper on the card is for timing,You can refer to this link: http://bbs.openvox.cn/viewthread.php?tid=874& ;extra=page%3D1 .By the way if you want to know the hardware details of the card,Please check this link http://downloads.openvox.cn/pub/datasheets/English/A400_A800_A1200_Series_Analog_Card_Datasheet.pdf.

Best regards

upper.hua

Hi upper.hua,
thanks for your quick reply and the link. It's too bad that the card does not provide for hooking up LEDs as this would be a very nice feature, but at least I now know what the jumper block should be used for ...

Regards,

Atom2