×
Notice
The forum is in read only mode.
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
A800P + D210E problem when "service dahdi start"
×
Questions about A400/800/1200 Analog Interface Card
A800P + D210E problem when "service dahdi start"
13 years 1 week ago #6895
by valkyrie09
Hi,
We have one Server with 1 A800P card in it, and now we add 1 D210E to expand the server.
The problem is everytime we use "service dahdi restart" the error shows up ...
Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)
and when check from dahdi_tool ... the card sequence has changed ... the A800P is on the third span now ... before it always in the first span ...
but this only happens when i do "service dahdi stop" and then "service dahdi start" on the server.
Is there any solution to avoid this happen ?
Thanks
ZH
i] Last edited by valkyrie09 at 2011-5-9 17:56 [/i
13 years 1 week ago #6896
by svolta
Hi,
Please check the order of these 2 drivers in /etc/dahdi/modules, and add these 2 dirvers in /etc/modprobe.d/dahdi.blacklist.conf.
13 years 1 week ago #6897
by valkyrie09
Original posted by svolta at 2011-5-9 13:35
Hi,
Please check the order of these 2 drivers in /etc/dahdi/modules, and add these 2 dirvers in /etc/modprobe.d/dahdi.blacklist.conf.
Hi,
There's only opvxa1200 in /etc/dahdi/modules. Is this okay ?
Thanks
ZH
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
A800P + D210E problem when "service dahdi start"
Time to create page: 0.040 seconds