Use 'tail /var/log/asterisk/full' to find out why

he is strange what it happens to me, I have one 1200 with trixbox 2,2 the problem it is that I form everything and he walks ok but when reseteo serves spoils everything and it leaves east error to me:

---

Asterisk could not start!
Use 'tail /var/log/asterisk/full' to find out why.

---

[root@asterisk1 ~]# tail /var/log/asterisk/full
May 30 03:53:43 WARNING[3649] pbx.c: Context 'app-calltrace-perform' tries inclu
des nonexistent context 'app-calltrace-perform-custom'
May 30 03:53:43 WARNING[3649] pbx.c: Context 'app-calltrace' tries includes none
xistent context 'app-calltrace-custom'
May 30 03:53:43 VERBOSE[3649] logger.c: [pbx_functions.so]May 30 03:53:43 VERBO
SE[3649] logger.c: [pbx_functions.so] => (Builtin dialplan functions)
May 30 03:53:43 VERBOSE[3649] logger.c: [chan_zap.so]May 30 03:53:43 VERBOSE[36
49] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI)
May 30 03:53:43 WARNING[3649] chan_zap.c: Unable to specify channel 1: No such d
evice or address
May 30 03:53:43 ERROR[3649] chan_zap.c: Unable to open channel 1: No such device
or address
here = 0, tmp->channel = 1, channel = 1
May 30 03:53:43 ERROR[3649] chan_zap.c: Unable to register channel '1'
May 30 03:53:43 WARNING[3649] loader.c: chan_zap.so: load_module failed, returni
ng -1
May 30 03:53:43 WARNING[3649] loader.c: Loading module chan_zap.so failed!

---

on the other hand also it happens to me that hup does not do hang and it remains with completes hooked call

i think you still not run up the a1200p device driver?