G400E echo

Hello,
What version of your chan_extra? You will see it in directory /etc/openvox/opvxg4xx/modules/ from version chan_extra-2.0.0.

The older versions don's support this.

Hello Joe,
I'm using chan_extra 1.2.1 ... The /etc/openvox/opvxg4xx/modules/ directory does't exist in my directory..


The source installation directory is /root/src/asterisk-complete/chan_extra/1.2.1/src/opvxg4xx/ .. I'm not sure if this is what you're referring to.. however, there's no m20.conf file.


I'm using dahdi 2.5.0.2+2.5.0.2


Thanks,
Juan

Hello Juan, Please forward to your source directory and find about line 887 and 893 in file m20.c
There is AT command AT+QAUDCH, and its values are:

AT+QAUDCH=0 (NORMAL_AUDIO)
AT+QAUDCH=1 (HEADSET_AUDIO)
AT+QAUDCH=2 (LOUDSPEAKER_AUDIO)
AT+QAUDCH=3 (AUTO)
By default, its value is 1, can you switch its value to other and see if it's useful?

Or set "AT_CALL_PROCEEDING =>" from "AT+CLVL?" to "AT+QECHO".

i] Last edited by Joe.Yung at 2012-3-8 10:18 [/i

Hello Joe,
I will test this tomorrow and will let you know the result.

After I update the m20.c file, I have run the ./install.sh script again in the chan_extra source directory, right?

Juan