×
Notice
The forum is in read only mode.
Forum
VoIP Gateways Support
GSM Gateway
WGW1002G as sip-client setup help nedded
×
Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway
WGW1002G as sip-client setup help nedded
Less
More
Posts: 5
Thank you received: 0
9 years 4 months ago #10090
by lexalex
I made a SIP-connection as described in manual (using settings from provider (from asterisk.tgz)):
SIP Endpoints -> "Add New SIP Endpoint":
Name: testname
User Name: (mynum)
Password: (mypass)
Registration:This gateway registers with the endpoint
Hostname or IP Address: multifon.ru
Transport: TCP
NAT Traversal: Yes
Advanced:Registration Options
Authentication User: (mynum)
Register Extension: (mynum)
From User: (mynum)
From Domain: multifon.ru
Remote Secret: (mypass)
Port: 5060
Qualify: Yes
Qualify Frequency: 60
Outbound Proxy: sbc.megafon.ru
Call Settings
DTMF Settings
DTMF Mode: Inband Then: "Save" and "Apply"
I see "SIP Status"= "
Request Sent " in SYSTEM->Status->SIP_Information for "Endpoint Name"= (testname)
But I can make/accept calls with X-Lite softphone using the same settings!!
I got
register=>(mynum):(mypass):(mynum)@multifon.ru:5060/(mynum) in ADVANCED -> "Asterisk File Editor" -> sip_general.conf
but there should be
register=>(mynum)@multifon.ru:(mypass):(mynum)@sbc.megafon.ru:5060/(mynum) (in [general] section of sip.conf) according to exaple configiration
So,
Should I correct "
register=> " option manually?
Less
More
Posts: 77
Karma: 5
Thank you received: 7
9 years 4 months ago #10091
by Michael.zou
Hi.
you do not need to modify the configuration files, just modify in web GUI, and does it always show "request sent" of the sip status?
Less
More
Posts: 5
Thank you received: 0
9 years 4 months ago #10092
by lexalex
But I'm getting WRONG optionline ("register=>" in sip.conf) isung web GUI! (It's NOT in form described in the example)
And this SIP always has "Request Sent " status.
Less
More
Posts: 77
Karma: 5
Thank you received: 7
9 years 4 months ago #10093
by Michael.zou
Hi.
Can you let me check remotely? And it is too late now, can I contact you tomorrow?
Please add me to your skype contact list, my skype is along.zou, named Michael.
Forum
VoIP Gateways Support
GSM Gateway
WGW1002G as sip-client setup help nedded
Time to create page: 0.046 seconds