G400P + G400E same server

Hi,
I had the G400P working perfectly, but I bought 2 more G400E and installed on the same server.
Simply put slots pci-exp and found time!
Extra version: 2.4.1.2
Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO
OpenVox G400P GSM/CDMA PCI Card 0 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 0 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 0 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 0 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 2 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 2 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 2 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
OpenVox G400P GSM/CDMA PCI Card 2 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)

>gsm show spans
GSM span 1: Provisioned, Up, Active
GSM span 2: Provisioned, Up, Active
GSM span 3: Provisioned, Up, Active
GSM span 4: Provisioned, Down, Active ( no chip)
GSM span 5: Provisioned, Up, Active
GSM span 6: Provisioned, Up, Active
GSM span 7: Provisioned, Up, Active
GSM span 8: Provisioned, Up, Active
GSM span 9: Provisioned, Down, Active <- not work
GSM span 10: Provisioned, Down, Active <- not work
GSM span 11: Provisioned, Up, Active <- ok
GSM span 12: Provisioned, Down, Active <- not work

What am I doing wrong?

thanks,

Marcelo.

Hello,

Could I know more your system information? Did you screw down the antennas of the third card?

what info is displaying on the Asteirsk console? Meanwhile, all of SIM cards are not out of service,right?

Can I have your IM contact?

Yes, the antennas are tight. 9,10,12 Only the spans do not work.

dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.4.1.2
ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Found an OpenVox G400P: Version 1.1
opvxg4xx: slot 0 is Installed
opvxg4xx: slot 1 is Installed
opvxg4xx: slot 2 is Installed
opvxg4xx: slot 3 is Installed
opvxg4xx: Powering up all spans...
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 177 <

---

ERRO!
Found an OpenVox G400P: Version 1.1
opvxg4xx: slot 0 is Installed
opvxg4xx: slot 1 is Installed
opvxg4xx: slot 2 is Installed
opvxg4xx: slot 3 is Installed
opvxg4xx: Powering up all spans...
ACPI: PCI Interrupt 0000:0c:02.0[A] -> GSI 17 (level, low) -> IRQ 177 <

---

ERRO!
Found an OpenVox G400P: Version 1.0
opvxg4xx: slot 0 is Installed
opvxg4xx: slot 1 is Installed
opvxg4xx: slot 2 is Installed
opvxg4xx: slot 3 is Installed
opvxg4xx: Powering up all spans...
dahdi_echocan_oslec: Registered echo canceler 'OSLEC'

What I noticed was in dmesg. Two plates and a G400E and G400P with the same irq. I think it is not normal, is not it?

Yes, it's not normal, how many PCI slots of your system? Did you remove one of cards to another's PCI slot and see what happens? In order to fix your problem quickly, I would like to get access to your system now. Could I have this permission? And please tell me what's your IM account?

Joe,

I did, reinstalled the dahdi and worked perfectly.
But now another problem arose, gave an error in oslec.
I had to load mg2 but I try problem with the echo.

Thanks,

Marcelo.

Marcelo,

Can you insert this command below in /etc/openvox/opvxg4xx/modules/m20.conf on line 67?

AT+QECHO=221,2048,0,849,0

Save and exit, then restart driver and Asterisk.