×
Notice
The forum is in read only mode.
Forum
VoIP Gateways Support
GSM Gateway
GW1600
×
Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway
GW1600
Less
More
Posts: 3
Thank you received: 0
4 years 1 month ago #14790
by renan.feitosa
My Gw1600 are working only one module the other two only have the pwr led on and the sys rst are off how to fix that?
Less
More
Posts: 104
Thank you received: 10
4 years 1 month ago #14791
by Dario.hu
1. is that two modules work well before?
2. have you try put that two modules to other slot and check?
you can add my skype:dario.hu2 for more convinient contact.
Less
More
Posts: 2
Thank you received: 0
4 years 1 month ago #14792
by vito.rao
Hi,sir
The sys light is down,you can see whether there is a ttl interface on the board.If not, you can only contact sales team for repair.
Less
More
Posts: 3
Thank you received: 0
4 years 1 month ago #14793
by renan.feitosa
yes theres a ttl light blinking on the interface equivalent to the boards
Less
More
Posts: 2
Thank you received: 0
4 years 1 month ago #14794
by vito.rao
Have you tried dario's suggestions?If the problem persists,you need usb-ttl cable,this is the manual:https://www.openvox.cn/pub/misc/tools/Flash%20Voxstack%20Gateway%20Board%20with%20USB-TTL%20cable.pdf,you can add my skype: live:.cid.40c135e80b21dc4 to talk.
Forum
VoIP Gateways Support
GSM Gateway
GW1600
Time to create page: 0.041 seconds