×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
D110/210/410 Series
how to setup d410p in t1 mode
×
Questions about D110/210/410 T1/E1/J1 PRI Cards
how to setup d410p in t1 mode
15 years 8 months ago #1742
by sunkits
Hello:
I have a d410p pci card. I wnat to use 2T1 port in this card.
I want to know how to write /etc/zaptel.con and zapata.con that
my asterisk can work well?
Thinks.
15 years 8 months ago #1743
by admin
Hi
example of zaptel.conf for 2T1
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
example of zapata.conf for 2T1
callprogress=no
signalling=pri_cpe
switchtype=national
overlapdial=yes
usecallerid=yes
hidecallerid=no
immediate=no
echocancel=no
echocancelwhenbridged=no
callerid=asreceived
context=incoming-call
channel=1-23,25-47
language=es
rxgain=0.0
txgain=0.0
You should modify them based the your application.BTW you should
set D410P DIP switch according Page 11 of
www.openvox.com.cn/downloadsFile/D210P%20D410P-User-Manual.pdf
BR
Wang Xiang
15 years 8 months ago #1744
by sunkits
Thank you very much, I try.
Forum
Telephony Cards Support
D110/210/410 Series
how to setup d410p in t1 mode
Time to create page: 0.030 seconds