desynchronization problem!!!

HW:
Intel Xeon Quad-core 2.7GHz
4GB RAM
2 Hard disk serial scsci 220GB
1 OpenVox D410PE
1 OpenVox A400E
1 Digium TDM800P

SW:
Linux 2.6.18.2 SMP
libpri 1.4.0
zaptel 1.4.5.1
asterisk 1.4.10

Error:
Modules loaded: wct4xxp, wctdm24xxp and wctdm
There is no problem until two hours when starts to show in asterisk console:

== Primary D-Channel on span 1 up

Log:
chan_zap.c:2393 pri_find_dchan: No D-channels available! Using
Primary channel 16 as D-channel anyway!
pbx_spool.c: Call failed to go through, reason 8
res_features.c: Don't know what to do about control frame: -1

[May 15 10:00] WARNING[6891] app_dial.c: Unable to create channel
of type 'Zap' (cause 34 - Circuit/channel congestion)
[May 15 10:00] WARNING[25229] chan_zap.c: No D-channels available!
Using Primary channel 16 as D-channel anyway!
[May 15 10:00] ERROR[25229] chan_zap.c: !! Got I-frame while link state 2
[May 15 10:01] WARNING[6905] app_dial.c: Unable to create channel
of type 'Zap' (cause 34 - Circuit/channel congestion)
[May 15 10:01] NOTICE[25226] chan_sip.c: Received SIP subscribe for
peer without mailbox: mmartinez
[May 15 10:01] WARNING[6915] app_dial.c: Unable to create channel
of type 'Zap' (cause 34 - Circuit/channel congestion)
[May 15 10:01] ERROR[25229] chan_zap.c: !! Got S-frame while link down
[May 15 10:01] WARNING[6925] app_dial.c: Unable to create channel
of type 'Zap' (cause 34 - Circuit/channel congestion)
[May 15 10:01] ERROR[25229] chan_zap.c: !! Got S-frame while link down
[May 15 10:01] NOTICE[25226] chan_sip.c: Received SIP subscribe for
peer without mailbox: jtascon
[May 15 10:01] WARNING[6934] app_dial.c: Unable to create channel
of type 'Zap' (cause 34 - Circuit/channel congestion)
[May 15 10:01] WARNING[25229] chan_zap.c: No D-channels available!
Using Primary channel 16 as D-channel anyway!
[May 15 10:01] ERROR[25229] chan_zap.c: !! Got S-frame while link down

zaptel.conf
[code:1]
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
span=2,2,0,ccs,hdb3,crc4
bchan=32-46,48-62
dchan=47
span=3,3,0,ccs,hdb3,crc4
bchan=63-77,79-93
dchan=78
span=4,4,0,ccs,hdb3,crc4
bchan=94-108,110-124
dchan=109
fxsls=125-132
fxsls=133-136
[/code:1]

zapata.conf
[code:1]
[channels]

language=es
context=incoming
musiconhold=default
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpress=yes
callwaitingcallerid=yes
threewaycallin=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
immeddiate=yes
pridialplan=unknown
callgroup=1
rxgain=0.0
faxdetect=incoming
facilityenable=no
callerid=4871000
txgain=0.0

;Autocall
context=incoming
switchtype=euroisdn
resetinterval=43200
signalling=pri_cpe
group=4
channel => 26-31
;Comcel
context=incoming
echocancel=yes
signalling=fxs_ls
rxgain=11.00
txgain=11.00
group=3
channel => 126-132
;Local
context=incoming
switchtype=euroisdn
resetinterval=43200
signalling=pri_cpe
group=2
channel => 1-15,17-25
;Movistar
context=incoming
echocancel=yes
signalling=fxs_ls
rxgain=11.00
txgain=11.00
group=1
channel => 125
[/code:1]

hello:
here is an example to follow:
www.mail-archive.com/[email protected]/msg00032.html
and make sure adjusting the values in zapata.conf accordingly.
Regards!
James.zhu

what does the D410PE mean? it is a D410P or D410E?

The card is D410E...

does this card have a firmware 1.2 label stick on the card?

How should I know what firmware this card has?