keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about D110/210/410 T1/E1/J1 PRI Cards

d210p stop working

17 years 19 hours ago #278 by jahyde
I have a D210, and it keeps dying, here are my configs:

/etc/sysconfig/zapata:
paste.uni.cc/14968
/etc/zaptel.conf:
paste.uni.cc/14969
/etc/asterisk/zapata.conf:
paste.uni.cc/14970

any ideas what might be wrong? -I thought my first port was burned, so switched to 2nd port, now everytime wct4xxp loads it says:

modprobe wct4xxp
CAS signalling on span 2 conflicts with Clear channel on channel 40.
FATAL: Error running install command for wct4xxp

but i cant find channel 40 anywhere. Is there something wrong with my configs?
16 years 11 months ago #281 by miaolin
i think your forget setup the t1/e1 switch on the card from E1 to T1, all the cards are seted to E1 as default.
Time to create page: 0.040 seconds
Powered by Kunena Forum