NOT receive calls with B100P

B100P problem. I can make calls, but to receive calls, I get an error. Below
expose several catches. Thanks!

dahdi-channels.conf:

; Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER)
group=0,11
context=from-isdn
overlapdial=yes
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63


ELASTIC*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked St ate
pseudo default default In Service
1 from-isdn default In Service
2 from-isdn default In Service


When calling from a telephone number of ISDN header


-- Extension '924563021' in context 'from-isdn' from '675827597' does not exist. Rejecting call on channel 0/2, span 1
> doing dnsmgr_lookup for 'sip.voipcheap.com'



ELASTIC*CLI> pri show spans
PRI span 1/0: Provisioned, Up, Active


ELASTIC*CLI> dahdi show channel 1 Channel: 1I>
File Descriptor: 16
Span: 1
Extension:
Dialing: no
Context: from-isdn
Caller ID: 924563163
Calling TON: 1
Caller ID name:
Mailbox: none
Destroy: 0
InAlarm: 0
Signalling Type: ISDN BRI Point to MultiPoint
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Busy Detection: no
TDD: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
DND: no
Echo Cancellation:
128 taps
(unless TDM bridged) currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook

Hi,
How did you write your inbound dialplan? Please write it like this:
[from-isdn]
exten=>_X.,1,Dial()
exten=>_X.,2,Hangup()