keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions on Asterisk with SS7 Chinese variant. (有关Asterisk+中国七号信令的问题)

ss7呼叫挂机原因AST_CAUSE_NORMAL_CIRCUIT_CONGESTION

14 years 4 weeks ago #5147 by jason.cao1
各位好!

在呼叫的时候,直接挂机,挂机原因是AST_CAUSE_NORMAL_CIRCUIT_CONGESTION,具体日志如下:
Attempting call on This email address is being protected from spambots. You need JavaScript enabled to view it. for This email address is being protected from spambots. You need JavaScript enabled to view it. (Retry 1)
-- Executing [02110086@ss7-callback-calling:1] AMU_CALLING("This email address is being protected from spambots. You need JavaScript enabled to view it.", "SS7/linkset/02110086") in new stack
[Apr 7 20:37:53] DEBUG[14560]: l4isup.c:824 ss7_requester: SS7 request (SS7/linkset/02110086) format = 0x8.
[Apr 7 20:37:53] ERROR[14560]: l4isup.c:837 ss7_requester: SS7 requester: No such linkset: 'linkset', using default
[Apr 7 20:37:53] DEBUG[14560]: l4isup.c:867 ss7_requester: SS7 channel SS7/linkset/02110086 allocated successfully.
[Apr 7 20:37:53] DEBUG[14560]: l4isup.c:2006 ss7_call: SS7 call, addr=linkset/02110086, cid=15608068835(0x0/Presentation Allowed, Not Screened) CIC=42. linkset '|s1'
[Apr 7 20:37:53] DEBUG[14560]: l4isup.c:1873 isup_send_iam: chan_ss7: isup_send_iam: ISDN_H324M is not set.
[Apr 7 20:37:53] DEBUG[14560]: l4isup.c:413 mtp_enqueue_isup_packet: Queue packet CIC=42, len=37, linkset='|s1', link='|1', slinkset='|s1', slink='|1'
-- Sent IAM CIC=42 ANI=15608068835 DNI=02110086 RNI=
[Apr 7 20:37:53] DEBUG[14222]: mtp.c:1944 mtp_thread_main: Queue MSU, lsi=0, last_send_ix=0, linkset=|s1, m->link=|1
-- Called linkset/02110086
[Apr 7 20:37:53] DEBUG[14222]: mtp.c:1652 mtp2_fill_zaptel_buf: Sending buffer to zaptel len=41, on link '|1' bsn=56, fsn=92.
[Apr 7 20:37:53] DEBUG[14222]: mtp.c:1301 mtp2_good_frame: Got MSU on link '|1' sio=5 slc=14 m.sls=0 bsn=1/92, fsn=1/57, sio=85, len=16: 33 ff ff e3 16 ff 0a 2a 00 0c 02 00 02 82 a2
[Apr 7 20:37:53] DEBUG[14222]: l4isup.c:2646 process_circuit_message: Process circuit message REL, CIC=42, state=2, reset_done=1
-- SS7 hangup 'SS7/|s1/42' CIC=42 Cause=34 (state=7)
[Apr 7 20:37:53] DEBUG[14560]: l4isup.c:2078 ss7_hangup: SS7 hangup 'SS7/|s1/42' CIC=42 (state=7), chan=0x09ea7a68
[Apr 7 20:37:53] DEBUG[14560]: l4isup.c:413 mtp_enqueue_isup_packet: Queue packet CIC=42, len=12, linkset='|s1', link='|1', slinkset='|s1', slink='|1'
== Everyone is busy/congested at this time (1:0/1/0)
xianxianpgsql_prepaid_dial: dial (SS7/linkset/02110086) exited with Return Code: 0
[Apr 7 20:37:53] DEBUG[14222]: mtp.c:1944 mtp_thread_main: Queue MSU, lsi=0, last_send_ix=0, linkset=|s1, m->link=|1


我在google上面没有查到相应的答案,请各位大侠指教。

i] Last edited by jason.cao1 at 2010-4-8 09:32 [/i
14 years 4 weeks ago #5148 by james.zhu
hi:
你的配置可能都不对的,ss7 确认起来了(inservice)?检查这个错误:
===
r: SS7 requester: No such linkset: 'linkset', using default
===============

14 years 4 weeks ago #5149 by jason.cao1
确认起来了,就是白天呼叫正常,到晚上,呼叫就不正常,经常出现该问题。
14 years 4 weeks ago #5150 by james.zhu
hi:
====看看这个=========
SS7 requester: No such linkset: 'linkset', using default
===============
不清楚你的系统为什么出现了这个? 如果晚上有问题的话,请 询问运营商的链路是否不稳定。

Time to create page: 0.034 seconds
Powered by Kunena Forum