我該用哪個版本的Elastix才能不需要patch&#19

Dear sir,

目前我使用Elastix 1.3，按照貴公司技術人員協助，將Asterisk版本降至1.4.18，Zaptel(with openvox patch)降至1.4.11，雖然看起來硬體卡(A800P 4S4O)正常，但是接在FXS的普通電話機，利用Dial(Zap/5/1,,rt)的方式撥入，卻不會響鈴。FXO進線系統也不會有反應。

我想請問是否有哪個Elastix / Trixbox是貴公司測試過完整支援A800P且使用正常？無論是Trixbox/Elastix官方版本，或者是貴公司patch過的，煩請告知下載的URL，好嗎？

Best regards,
Charles

Hi Charles,

Elastix has supported OpenVox A800P/A1200P right from elastix 0.9. The latest version elastix 1.3 can support these cards without a sweat. You can simply install the CD and the card goes. For official download, please visit www.elastix.org .

As for trixbox, all our hardware are officially certified by trixbox CE. www.trixbox.org/partners/certified-solutions
The trixbox supports OpenVox A800P/A1200P from the 2.4 version.

Hope these can help.

Best Regards,
Belief

Dear Belief,

Yes, I downloaded the lastest version elastix 1.3 and installed it on my new system. I got an error about zaptel. Asterisk can't start up although the zaptel status seems ok.

[root@test freepbx]# cat /proc/zaptel/1
Span 1: OPVXA1200/0 "OpenVox A1200P Board 1"

1 OPVXA1200/0/0 FXOKS
2 OPVXA1200/0/1 FXOKS
3 OPVXA1200/0/2 FXOKS
4 OPVXA1200/0/3 FXOKS
5 OPVXA1200/0/4 FXSKS
6 OPVXA1200/0/5 FXSKS
7 OPVXA1200/0/6 FXSKS
8 OPVXA1200/0/7 FXSKS
9 OPVXA1200/0/8
10 OPVXA1200/0/9
11 OPVXA1200/0/10
12 OPVXA1200/0/11

I can see OK at zttool too.
I ever discussed with Miao. He suggested me to downgrade my asterisk to 1.4.18 and zaptel to 1.4.11(with a1200 patch) on my elastix 1.3.
After the downgrade steps, asterisk can start up without any configuratios modified. But I can't dial to FXS and FXO. I had tried a lot of methods such as "Dial(Zap/5/1,,rt)", but there is no ringing on my callee(CLI: callee was ringing). I ever tried to make a call from PSTN to FXO. And there was nothing happened in CLI. Mian ever logon to my system and he didn't think the hardware(A800P) was bad. I had no idea about this condition.

I tried to install with trixbox 2.2.4 ISO released by openvox. But the asterisk can not start up before my downgrade.

I hope any engineer can login my trixbox to help me solve it. Please let me know if you need my ssh / web information and ID & Password.

Help me, I have tried it over two weeks.

Please send ssh account to This email address is being protected from spambots. You need JavaScript enabled to view it.[/list]

更新狀態，先前問題疑似主機問題，雖為Intel CPU，更換主機後，安裝正常。

请问目前的trixbox和elastix 的最新稳定版，是否装好就能和卡正常工作？