×
Notice
The forum is in read only mode.
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
请问来电显示FSK ,DTMF分别要怎么设置?[A1200]
×
Questions about A400/800/1200 Analog Interface Card
请问来电显示FSK ,DTMF分别要怎么设置?[A1200]
14 years 4 months ago #4437
by miclshui
请问来电显示FSK ,DTMF分别要怎么设置?[A1200]
现在我是从Siemens Hipath 3800 PBX里面拉出几个分机端口接在A1200上面做为外线
系统是Elastix
来电显示一直调试不出来..
请求协助
Elastix 1.6
已经做了下面修改
在/etc/dahdi/system.conf这个文件下:
修改成 loadzone=cn
defaultzone=cn
在/etc/asterisk/indications.conf这个文件下:
修改成 country=cn
在/etc/asterisk/chan_dahdi.conf这个文件下:
添加
usecallerid=yes
cidsignalling=dtmf
cidstart=polarity [cidstart=ring]
以上都测试过不起作用,请问如果是FSK我应该如何设置?
-
Robert
-
-
Visitor
-
14 years 4 months ago #4438
by Robert
14 years 4 months ago #4465
by dosimple
在elastix1.5.2里面,我用modprobe opvxa1200 opermode=CHINA有问题,使用默认的正常,不知道elastix1.6怎么样,:lol
其实在elastix里面我一开始连loadzone和defaultzone都没修改,好像也没出现什么问题,后来修改了,也没发现什么用处。
我的环境:a1200+elastix1.5.2
14 years 4 months ago #4466
by james.zhu
hi:
那个opermode=CHINA 应该是没有问题的,无论你在哪个版本上都是支持的。
另外你的indicatio.conf 文件必须修改。
regards!
James.zhu
14 years 4 months ago #4467
by Joe.Yung
Hello ,
请发你的SSH到我的邮箱This email address is being protected from spambots. You need JavaScript enabled to view it.. 这样我们可以尽快帮助你!
Best Regards!
Joe.Yung
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
请问来电显示FSK ,DTMF分别要怎么设置?[A1200]
Time to create page: 0.044 seconds