- Thank you received: 0
×
Questions about G400/G410 Cards.
Elastix 2.0.3 + G400E
12 years 5 months ago #7496
by svaadm
Once Source code install has been finalized all files installed in /lib and /usr/lib folders. I have replaced /usr/lib64/asterisk/modules folder with /usr/lib/asterisk/modules folder and also copied libgsmat.a, libgsmat.so, libgsmat.so.1.0 files from /usr/lib folder into /usr/lib64 folder/ After that chan_extra.so module loaded sucessfully. However, once DAHDI initialization is attempted, the following messages appear:
i] Last edited by svaadm at 2011-10-31 16:12 [/i
[root@srv03 asterisk]# service dahdi start
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
opvxd115: FATAL: Module opvxd115 not found.
[FAILED]
wcte12xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
opvxa1200: FATAL: Module opvxa1200 not found.
[FAILED]
ystdm8xx: FATAL: Module ystdm8xx not found.
[FAILED]
ystdm16xx: FATAL: Module ystdm16xx not found.
[FAILED]
ap400: FATAL: Module ap400 not found.
[FAILED]
dahdi_dynamic_eth: [ OK ]
dahdi_dynamic_ethmf: [ OK ]
ax1600p: FATAL: Module ax1600p not found.
[FAILED]
zaphfc: FATAL: Module zaphfc not found.
[FAILED]
wcopenpci: FATAL: Module wcopenpci not found.
[FAILED]
rxt1: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
Channel map:
0 channels to configure.
[ OK ]
r1t1: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
Channel map:
0 channels to configure.
[ OK ]
rcbfx: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
Channel map:
0 channels to configure.
[ OK ]
No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: [ OK ]i] Last edited by svaadm at 2011-10-31 16:12 [/i
12 years 5 months ago #7497
by bert
Hi
Maybe you didn't install chan-extra successfully.What's the output of command "dahdi_hardware"? Are you online now ? Please add my MSN:[email protected] or skype:bert.zhang89
Maybe you didn't install chan-extra successfully.What's the output of command "dahdi_hardware"? Are you online now ? Please add my MSN:[email protected] or skype:bert.zhang89
12 years 5 months ago #7498
by svaadm
I don't think that running dahdi_hardware will help, I am working with a virtual machine. I have also noted that not all modules that used to be in /usr/lib64/asterisk/modules folder are now located in /usr/lib/asterisk/modules. I thing my Elastix won't work properly without the modules in question.
12 years 5 months ago #7501
by svaadm
There is no such module there. Using internet messengers are not allowed in our company therefore I am unable to add you. I think that OpenVox must release proper installer for x64 systems, especially because I was reassured the card is fully compatible with Elastix when I bought it.
Time to create page: 0.042 seconds