How to install G400P in Elastix 1.5.2

最近购买了一张G400P板卡，但根据官网上的安装手册，下载的驱动安装包安装之后，系统就无法启动了。请问管理员，我如何在才在Elastix1.5.2上面安装G400P来用？

万分感谢。

G400P不能在elastix或trixbox上安装，因为需要安装我们修改过的bristuff，请参考以下链接：
http://bbs.openvox.cn/viewthread.php?tid=846&extra=page%3D1

谢谢Denins，我现在用根据安装手册来安装之后

运行asterisk -vvvvvgc提示

== Parsing '/etc/asterisk/zapata.conf': Found
Dec 3 10:25:43 ERROR[2927]: chan_zap.c:12697 setup_zap: Unknown signalling method 'gsm'
Dec 3 10:25:43 ERROR[2927]: chan_zap.c:12291 setup_zap: Signalling must be specified before any channels are.

/etc/asterisk/zapata.conf 和/etc/zapata.conf的配置和安装手册是一样的。请问这是什么原因？

问一下你现在安装的系统是CentOS还是elastix?
如果是CentOS的话发SSH到我的邮箱(不是CentOS的话请安装好一个干净的CentOS我登陆上去给你装G400P)：
This email address is being protected from spambots. You need JavaScript enabled to view it.

我现在装的是CentOS 5.3。

登陆方式已经mail给你了，要不麻烦你先上来看看啦，如果不行，我再重装一个干净的CentOS。

谢谢！

hi,
i have 2 g400p gsm cards. i installed correctly the bristuff from your site.
i need to make an gsm gateway that will provide a trunk for another machine on wich is installed asterisk.

can anyone help me with some suggestions ?? i always tought that installing elastix with g400p will save my day,....