Advance Routing Rule in OpenVox VS-GW1600v2

There are two gateways:
OpenVox VS-GW1600v2 (Software Version: 2.1.10)
OpenVox VS-GW1600v2 (Software Version: 2.1.26)

There was a problem with additional route rules on version 2.1.26.
For example, if only one Advance Routing Rule is set in Routing Rules, then the call goes well. [img_1]


If you create 2 different Routing Rules, everything also works fine. [img_2]


BUT, if you write several Advance Routing Rule in one Routing Rules, then the call is terminated [img_3, img_3.1]



In version 2.1.10, there were no such problems, and it was possible to assign several Advance Routing Rule in one rule [img_4]


How can you correctly configure this parameter on the new firmware.
P.S. Sorry for the bad english.

Hi Sir,

You can add my skype:dario.hu2 and let me help you remote.

Good day.
It would be great if you could continue to chat on the forum. Is it really necessary to use Skype?

Good day,

Please give your email to me, I will send the firmware which have solved this problem to you. My email is This email address is being protected from spambots. You need JavaScript enabled to view it.

Good day,
I sent you email from This email address is being protected from spambots. You need JavaScript enabled to view it.. You can send the firmware to this mailbox.

have send firmware to you, you can give the result to my email This email address is being protected from spambots. You need JavaScript enabled to view it.