- Thank you received: 0
×
Questions about B100/200/400/800 ISDN BRI Cards
[Solved] B200P - alarms RED
14 years 10 months ago #3434
by james.zhu
hello:
you can try to change to hardhdlc. please make sure your code is fully completed. because there are many patches files, i am really not sure the code. therefore, i am still testing the wcb4xxp. have you noticed that digium still open the issue? please make sure the code is released officially.
you may check with this url:
www.asterisk-es-rsp.org/blog/?p=5
regards!
james.zhu
you can try to change to hardhdlc. please make sure your code is fully completed. because there are many patches files, i am really not sure the code. therefore, i am still testing the wcb4xxp. have you noticed that digium still open the issue? please make sure the code is released officially.
you may check with this url:
www.asterisk-es-rsp.org/blog/?p=5
regards!
james.zhu
14 years 9 months ago #3471
by SnOwMaN
Error was effectively coming from jumper set on the card.
And with the asterisk/dahdi patch on the url http://www.asterisk-es-rsp.org/blog/?p=5 you gave me, every thing is working.
I can call and receive calls with both card TDM410 and B200
I only got the error at the end of a call:
But interval between up and down is barely 0.5s, so it's not a problem for me.
Thanks for your support.
++
And with the asterisk/dahdi patch on the url http://www.asterisk-es-rsp.org/blog/?p=5 you gave me, every thing is working.
I can call and receive calls with both card TDM410 and B200
I only got the error at the end of a call:
== Primary D-Channel on span 3 down
[Jul 3 14:30:49] WARNING[16808]: chan_dahdi.c:3360 pri_find_dchan: No D-channels available! Using Primary channel 10 as D-channel anyway!
== Primary D-Channel on span 3 upBut interval between up and down is barely 0.5s, so it's not a problem for me.
Thanks for your support.
++
Time to create page: 0.034 seconds