keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
  1. Forum
  3. Telephony Cards Support
  5. B100/200/400/800 Series
  7. Problem launching mISDN for B200P
× Questions about B100/200/400/800 ISDN BRI Cards

Problem launching mISDN for B200P

15 years 2 months ago #2629 by SnOwMaN
Hi

I have bought a Openvox B200P card, all goes well it install mISDN driver, it compile with no errors, detect cards and config works. But when I run start all modules didn't load...

I have made the modification for B200P in /usr/sbin/mISDN.

# mISDN scan
1 mISDN compatible device(s) found:
>> BN4S0

mISDN config
Writing /etc/mISDN.conf for 1 mISDN compatible device(s):
>> BN4S0
/etc/mISDN.conf already present, saving a backup: /etc/mISDN.conf.bak




But when i start there all goes wrong
mISDN start
-- Loading mISDN modules --
>> /sbin/modprobe --ignore-install capi
>> /sbin/modprobe --ignore-install mISDN_core debug=0
>> /sbin/modprobe --ignore-install mISDN_l1 debug=0
FATAL: Error inserting mISDN_l1 (/lib/modules/2.6.27-11-server/extra/mISDN_l1.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install mISDN_l2 debug=0
FATAL: Error inserting mISDN_l2 (/lib/modules/2.6.27-11-server/extra/mISDN_l2.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install l3udss1 debug=0
FATAL: Error inserting l3udss1 (/lib/modules/2.6.27-11-server/extra/l3udss1.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install mISDN_capi
FATAL: Error inserting mISDN_capi (/lib/modules/2.6.27-11-server/extra/mISDN_capi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install hfcmulti type=0x4 protocol=0x2,0x2,0x2,0x2 layermask=0xf,0xf,0xf,0xf poll=128 debug=0 timer=0
FATAL: Error inserting hfcmulti (/lib/modules/2.6.27-11-server/kernel/drivers/isdn/hardware/mISDN/hfcmulti.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install mISDN_dsp debug=0 options=0

dmesg says:

[ 2165.829424] mISDN_l1: Unknown symbol mISDN_SetHandledPID
[ 2165.830360] mISDN_l1: Unknown symbol mISDN_register
[ 2165.830825] mISDN_l1: Unknown symbol mISDN_ctrl
[ 2165.831121] mISDN_l1: Unknown symbol mISDN_debug
[ 2165.831355] mISDN_l1: Unknown symbol mISDN_module_register
[ 2165.832119] mISDN_l1: Unknown symbol mISDN_init_instance
[ 2165.832418] mISDN_l1: Unknown symbol mISDN_queue_message
[ 2165.832670] mISDN_l1: Unknown symbol mISDN_module_unregister
[ 2165.833291] mISDN_l1: Unknown symbol mISDN_getrev
[ 2165.833704] mISDN_l1: Unknown symbol mISDN_unregister
[ 2165.850926] mISDN_l2: Unknown symbol mISDN_SetHandledPID
[ 2165.852030] mISDN_l2: Unknown symbol mISDN_register
[ 2165.852534] mISDN_l2: Unknown symbol mISDN_ctrl
[ 2165.852899] mISDN_l2: Unknown symbol mISDN_module_register
[ 2165.853872] mISDN_l2: Unknown symbol mISDN_init_instance
[ 2165.854200] mISDN_l2: Unknown symbol mISDN_queue_message
[ 2165.854455] mISDN_l2: Unknown symbol mISDN_module_unregister
[ 2165.855180] mISDN_l2: Unknown symbol mISDN_getrev
[ 2165.855681] mISDN_l2: Unknown symbol mISDN_unregister
[ 2165.872267] l3udss1: Unknown symbol mISDN_SetHandledPID
[ 2165.872603] l3udss1: Unknown symbol mISDN_LogL3Msg
[ 2165.873458] l3udss1: Unknown symbol mISDN_register
[ 2165.873913] l3udss1: Unknown symbol mISDN_ctrl
[ 2165.874311] l3udss1: Unknown symbol mISDN_module_register
[ 2165.874646] l3udss1: Unknown symbol mISDN_l3_pos2ie
[ 2165.875001] l3udss1: Unknown symbol mISDN_get_free_ext_ie
[ 2165.875266] l3udss1: Unknown symbol mISDN_l3_ie2pos
[ 2165.875508] l3udss1: Unknown symbol mISDN_initQ931_info
[ 2165.876143] l3udss1: Unknown symbol mISDN_init_instance
[ 2165.876440] l3udss1: Unknown symbol mISDN_queue_message
[ 2165.876691] l3udss1: Unknown symbol mISDN_module_unregister
[ 2165.877418] l3udss1: Unknown symbol mISDN_getrev
[ 2165.877650] l3udss1: Unknown symbol mISDN_get_last_repeated_ie
[ 2165.878104] l3udss1: Unknown symbol mISDN_unregister
[ 2165.912445] mISDN_capi: Unknown symbol mISDN_QuickHex
[ 2165.912739] mISDN_capi: Unknown symbol mISDN_SetHandledPID
[ 2165.912970] mISDN_capi: Unknown symbol mISDN_alloc_l3msg
[ 2165.913828] mISDN_capi: Unknown symbol mISDN_add_pid_parameter
[ 2165.914103] mISDN_capi: Unknown symbol mISDN_register
[ 2165.914565] mISDN_capi: Unknown symbol mISDN_ctrl
[ 2165.915322] mISDN_capi: Unknown symbol mISDN_module_register
[ 2165.915553] mISDN_capi: Unknown symbol mISDN_AddIE
[ 2165.915911] mISDN_capi: Unknown symbol mISDN_AddvarIE
[ 2165.916559] mISDN_capi: Unknown symbol mISDN_l3_ie2pos
[ 2165.917412] mISDN_capi: Unknown symbol mISDN_init_instance
[ 2165.917814] mISDN_capi: Unknown symbol mISDN_queue_message
[ 2165.918303] mISDN_capi: Unknown symbol mISDN_module_unregister
[ 2165.918719] mISDN_capi: Unknown symbol mISDN_getrev
[ 2165.919271] mISDN_capi: Unknown symbol mISDN_unregister
[ 2165.972348] hfcmulti: Unknown parameter `protocol'

If you got any idea i will be very gracefull.


the mISDN.conf file:

<?xml version="1.0"?>
<!--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Card Type: BN2S0, BN4S0, BN8S0
Card Attributes: ulaw=(yes|no), dtmf=(yes|no), pcm_slave=(yes|no),
ignore_pcm_frameclock=(yes|no), rxclock=(yes|no),
crystalclock=(yes|no), watchdog=(yes|no)
Port Attributes: mode=(te|nt), link=(ptp|ptmp), master-clock=(yes|no),
capi=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Card Type: BN2E1
Card Attributes: ulaw=(yes|no), dtmf=(yes|no), pcm_slave=(yes|no),
ignore_pcm_frameclock=(yes|no), rxclock=(yes|no),
crystalclock=(yes|no), watchdog=(yes|no)
Port Attributes: mode=(te|nt), link=(ptp|ptmp), optical=(yes|no), los=(yes|no),
ais=(yes|no), slip=(yes|no), nocrc4=(yes|no), capi=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Card Type: hfcmulti, avmfritz, w6692pci
Port Attributes: mode=(te|nt), link=(ptp|ptmp), capi=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: hfcmulti
Options: poll=<number>, pcm=<number>, debug=<number>, timer=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: hfcsusb
Options: debug=<number> poll=<number>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: xhfc
Options: debug=<number>
Port Attributes: mode=(te|nt), link=(ptp|ptmp), line=(s0|up) capi=(yes|no)
lineloop_b1=(yes|no) lineloop_b2=(yes|no), lineloop_d=(yes|no)
polx=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: mISDN_dsp
Options: debug=<number>, options=<number>, poll=<number>,
dtmfthreshold=<number>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-->
<mISDNconf>
<module poll="128" debug="0" timer="no">hfcmulti</module>
<module debug="0" options="0">mISDN_dsp</module>
<devnode user="root" group="root" mode="644">mISDN</devnode>
<card type="BN4S0">
<port mode="te" link="ptmp">1</port>
<port mode="te" link="ptmp">2</port>
<port mode="te" link="ptmp">3</port>
<port mode="te" link="ptmp">4</port>
</card>
</mISDNconf>

15 years 2 months ago #2630 by james.zhu
hello,
please check that, you have a openvox B200P, how come the system detect the card as B400P? i think you done modification wrongly.
please read the page 9 of the pdf:
www.openvox.com.cn/downloadsFile/B200P_B...ser-Manual-mISDN.pdf
if you still have a problem, please email me your ssh to:[email protected]
regards!
James.zhu
15 years 2 months ago #2631 by SnOwMaN
My mistake I had reinstall the whole thing just before post but whitout change for B200P, still problem is the same with the modification.

I'm running on Ubuntu Server 8.10.


# mISDN scan
1 mISDN compatible device(s) found:
>> BN2S0



<?xml version="1.0"?>
<!--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Card Type: BN2S0, BN4S0, BN8S0
Card Attributes: ulaw=(yes|no), dtmf=(yes|no), pcm_slave=(yes|no),
ignore_pcm_frameclock=(yes|no), rxclock=(yes|no),
crystalclock=(yes|no), watchdog=(yes|no)
Port Attributes: mode=(te|nt), link=(ptp|ptmp), master-clock=(yes|no),
capi=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Card Type: BN2E1
Card Attributes: ulaw=(yes|no), dtmf=(yes|no), pcm_slave=(yes|no),
ignore_pcm_frameclock=(yes|no), rxclock=(yes|no),
crystalclock=(yes|no), watchdog=(yes|no)
Port Attributes: mode=(te|nt), link=(ptp|ptmp), optical=(yes|no), los=(yes|no),
ais=(yes|no), slip=(yes|no), nocrc4=(yes|no), capi=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Card Type: hfcmulti, avmfritz, w6692pci
Port Attributes: mode=(te|nt), link=(ptp|ptmp), capi=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: hfcmulti
Options: poll=<number>, pcm=<number>, debug=<number>, timer=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: hfcsusb
Options: debug=<number> poll=<number>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: xhfc
Options: debug=<number>
Port Attributes: mode=(te|nt), link=(ptp|ptmp), line=(s0|up) capi=(yes|no)
lineloop_b1=(yes|no) lineloop_b2=(yes|no), lineloop_d=(yes|no)
polx=(yes|no)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Module: mISDN_dsp
Options: debug=<number>, options=<number>, poll=<number>,
dtmfthreshold=<number>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-->
<mISDNconf>
<module poll="128" debug="0" timer="no">hfcmulti</module>
<module debug="0" options="0">mISDN_dsp</module>
<devnode user="root" group="root" mode="644">mISDN</devnode>
<card type="BN2S0">
<port mode="te" link="ptmp">1</port>
<port mode="te" link="ptmp">2</port>
</card>
</mISDNconf>



# mISDN start
-- Loading mISDN modules --
>> /sbin/modprobe --ignore-install capi
>> /sbin/modprobe --ignore-install mISDN_core debug=0
>> /sbin/modprobe --ignore-install mISDN_l1 debug=0
FATAL: Error inserting mISDN_l1 (/lib/modules/2.6.27-11-server/extra/mISDN_l1.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install mISDN_l2 debug=0
FATAL: Error inserting mISDN_l2 (/lib/modules/2.6.27-11-server/extra/mISDN_l2.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install l3udss1 debug=0
FATAL: Error inserting l3udss1 (/lib/modules/2.6.27-11-server/extra/l3udss1.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install mISDN_capi
FATAL: Error inserting mISDN_capi (/lib/modules/2.6.27-11-server/extra/mISDN_capi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install hfcmulti type=0x4 protocol=0x2,0x2 layermask=0xf,0xf poll=128 debug=0 timer=0
FATAL: Error inserting hfcmulti (/lib/modules/2.6.27-11-server/kernel/drivers/isdn/hardware/mISDN/hfcmulti.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> /sbin/modprobe --ignore-install mISDN_dsp debug=0 options=0

and same dmesg as before. So i will try to email you directly
15 years 2 months ago #2632 by james.zhu
hello, it seems that your system lost some isdn packages and ko files in your kernel? have you install that completely?
regards!
James.zhu
15 years 2 months ago #2633 by SnOwMaN
The .ko files that failed to load are present in my kernel folder but at dir /lib/module/"my-kernel-in-use"/extra, maybe install effectly goes in a wrong directory, but i'm not that experimented and could not said.
  1. Forum
  3. Telephony Cards Support
  5. B100/200/400/800 Series
  7. Problem launching mISDN for B200P
Time to create page: 0.053 seconds
Powered by Kunena Forum