Please Help Me! B100P Configuration in Trixbox 2.6.1

hello,
the B100P does not support LEDs, even the leds are there. unless you install isdn4bsd in freebsd, the leds will work.
you can go to :www.misdn.org to see more docs.
regards!
James.zhu

Ok, thankyou, I didn't know it. Your replies are inmediates, It shows the excellence of you service and your support. I know now that I can to buy more of yours products, because the support is very good.

How did you do for understand me? because I don't speak English, and por that I give thanks to you.

Regards,


DIDIER GRISALES MONTOYA
Sistemas 3 - Medellin - Colombia

I have same problem.
I have installed PBX in a flash, and following procedure for install B100P but I receive:

make: *** No rule to make target `load'. Stop.

I am under:
root@pbx:/usr/src/bristuff-0.3.0-PRE-1y-x/zaphfc $

Please for help.

hello:
please check the Makefile under the zaphfc, in the Makefile, there is a command: make load. are you missing the kernel directory or working with incorrect kernel?
=====================================
load: load$(BUILDVER)
=====================================
BUILDVER=$(shell if uname -r | grep -q ^2.6; then echo "linux26"; else echo "linux24"; fi)
=====================================
please check that!
regards!
James.zhu

Ok. Theres no make load statement in the Makefile ?!
I have downloaded bristuff-0.3.0-PRE-1y-x from junghans.net. I am in the folder zaphfc.

Heres the content of Makefile:

ifeq ($(MAKELEVEL),0)
PWD:=$(shell pwd)
endif

ifndef MACHINE
MACHINE :=$(shell uname -m)
endif
# FIXME: this variable sets ARCH in the kernel Makefile.
ARCH :=$(shell echo $(MACHINE) | sed -e s/i.86/i386/)
BRISTUFFBASE = $(shell dirname `pwd`)
ZAP = $(shell [ -f $(BRISTUFFBASE)/zaptel/zaptel.h ] && echo "-I$(BRISTUFFBASE)/zaptel")
EXTRA_CFLAGS+=$(ZAP)

# If you want to build for a kernel other than the current kernel, set KVERS
ifndef KVERS
KVERS:=$(shell uname -r)
endif
ifndef KSRC
ifneq (,$(wildcard /lib/modules/$(KVERS)/build))
KSRC:=/lib/modules/$(KVERS)/build
else
KSRC_SEARCH_PATH:=/usr/src/linux-2.4 /usr/src/linux
KSRC:=$(shell for dir in $(KSRC_SEARCH_PATH); do if [ -d $$dir ]; then echo $$dir; break; fi; done)
endif
endif
KINCLUDES:=$(KSRC)/include

ifeq (2.6,$(shell echo $(KVERS) | cut -d. -f1-2))
BUILDVER:=linux26
else
BUILDVER:=linux24
endif

MODULES:=zaphfc

MODULESO:=$(MODULES:%=%.o)
MODULESKO:=$(MODULES:%=%.ko)
ifeq ($(BUILDVER),linux26)
MODULESO+=$(SUBDIRS_EXTRA:%=%/)
endif

#NOTE NOTE NOTE
#
# all variables set before the include of Makefile.kernel26 are needed by the 2.6 kernel module build process

ifneq ($(KBUILD_EXTMOD),)

include $(src)/Makefile.kernel26

else

HOSTCC=gcc

INSTALL_PREFIX := /usr

CFLAGS+=-I. -O4 -g -fPIC -Wall
ifneq (,$(findstring ppc,$(MACHINE)))
CFLAGS += -fsigned-char
KFLAGS += -msoft-float -fsigned-char
endif
ifneq (,$(findstring x86_64,$(MACHINE)))
CFLAGS += -m64
KFLAGS += -mcmodel=kernel
endif
KFLAGS:=-I$(KINCLUDES) -O6
KFLAGS+=-DMODULE -D__KERNEL__ -DEXPORT_SYMTAB\
-Wall -I. -Wstrict-prototypes -fomit-frame-pointer
ifneq (,$(wildcard $(KINCLUDES)/linux/modversions.h))
KFLAGS+=-DMODVERSIONS -include $(KINCLUDES)/linux/modversions.h
endif

#
# Features are now configured in zconfig.h
#

KMAKE:= $(MAKE) -C $(KSRC) SUBDIRS=$(PWD)
KMAKE_INST:= $(KMAKE) INSTALL_MOD_PATH=$(DESTDIR) INSTALL_MOD_DIR=misc modules_install

# sample makefile "trace print"
#tracedummy=$(shell echo ====== GOT HERE ===== >&2; echo >&2)

SELINUX_ENABLED := $(shell [ -x /usr/sbin/sestatus ] && (/usr/sbin/sestatus | grep "SELinux status:" | grep -q "enabled"))

all: modules


ifeq ($(BUILDVER),linux24)
modules: $(MODULESO)
else
modules:
ifeq (,$(wildcard $(KSRC)/.config))
@echo "You do not appear to have the sources for the $(KVERS) kernel installed (under $(KSRC))."; exit 1
endif
$(MAKE) -C $(KSRC) SUBDIRS=$(PWD) HOTPLUG_FIRMWARE=$(HOTPLUG_FIRMWARE) EXTRA_CFLAGS=$(EXTRA_CFLAGS) modules
endif


install: all install-modules
@echo "###################################################"
@echo "###"
@echo "### zaphfc installed successfully."
@echo "###"
@echo "###################################################"


# Specific to a kernel version:
install-modules: modules
ifeq ($(BUILDVER),linux26)
for x in $(MODULESKO); do \
rm -f $(DESTDIR)/lib/modules/$(KVERS)/extra/$$x ; \
done
$(KMAKE_INST)
else
install -d $(DESTDIR)$(MODS_DIR)
endif
[ `id -u` = 0 ] && /sbin/depmod -a $(KVERS) || :

clean:
$(MAKE) -C $(KSRC) SUBDIRS=$(PWD) clean
rm -f Module.symvers

.EXPORT_ALL_VARIABLES:

FORCE:

endif

Anybody pls?