B200P + A400P on Trixbox 2.6.1

Hi all,

I have working trixbox 2.6.1 with openvox B200P mISDN card. After i add new A400P card, the current misdn line cannot be used.

How can i solve this problem..

thank you..

[code:1]
Jul 23 19:57:00 trixbox1 kernel: Zapata Telephony Interface Unloaded
Jul 23 19:57:00 trixbox1 kernel: Zapata Telephony Interface Registered on major 196
Jul 23 19:57:00 trixbox1 kernel: Zaptel Version: 1.4.10.1
Jul 23 19:57:01 trixbox1 kernel: Registered Tormenta2 PCI
Jul 23 19:57:01 trixbox1 kernel: Unregistered Tormenta2
Jul 23 19:57:01 trixbox1 kernel: Specify address with base=0xNNNNN
Jul 23 19:57:01 trixbox1 kernel: usbcore: registered new driver wcusb
Jul 23 19:57:01 trixbox1 kernel: Wildcard USB FXS Interface driver registered
Jul 23 19:57:01 trixbox1 kernel: usbcore: deregistering driver wcusb
Jul 23 19:57:01 trixbox1 kernel: INFO-xpp: revision trunk-r5566 MAX_XPDS=64 (8*
Jul 23 19:57:01 trixbox1 kernel: INFO-xpp: FEATURE: without BRISTUFF support
Jul 23 19:57:01 trixbox1 kernel: INFO-xpp: FEATURE: with PROTOCOL_DEBUG
Jul 23 19:57:01 trixbox1 kernel: INFO-xpp: FEATURE: with ECHO_SUPPRESSION
Jul 23 19:57:01 trixbox1 kernel: INFO-xpp: FEATURE: without XPP_EC_CHUNK
Jul 23 19:57:01 trixbox1 kernel: INFO-xpp: FEATURE: with sync_tick() from ZAPTEL
Jul 23 19:57:01 trixbox1 kernel: INFO-xpp_usb: revision trunk-r5566
Jul 23 19:57:01 trixbox1 kernel: usbcore: registered new driver xpp_usb
Jul 23 19:57:01 trixbox1 kernel: usbcore: deregistering driver xpp_usb
Jul 23 19:57:01 trixbox1 kernel: Registered tone zone 0 (United States / North America)
Jul 23 19:57:01 trixbox1 kernel: Zapata Telephony Interface Unloaded
Jul 23 19:57:04 trixbox1 kernel: Zapata Telephony Interface Registered on major 196
Jul 23 19:57:04 trixbox1 kernel: Zaptel Version: 1.4.10.1
Jul 23 19:57:04 trixbox1 kernel: ztdummy: RTC rate is 1024
Jul 23 19:57:07 trixbox1 kernel: Registered tone zone 0 (United States / North America)
Jul 23 19:57:10 trixbox1 kernel: mISDN: INTERNAL ERROR in /usr/src/redhat/BUILD/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235 st(00000100) addr(4100010
0) layer -1 out of range
Jul 23 19:57:10 trixbox1 kernel: mISDN: INTERNAL ERROR in /usr/src/redhat/BUILD/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235 st(00000100) addr(4100010
0) layer -1 out of range
Jul 23 12:15:00 trixbox1 mDNSResponder: mDNSPlatformRawTime went backwards by 29231830 ticks; setting correction factor to -2078618777
Jul 23 12:15:00 trixbox1 mDNSResponder: mDNSPlatformRawTime went backwards by 15369 ticks; setting correction factor to -2078603408
[trixbox1.localdomain log]#
[/code:1]

hello, please check it from here:
www.openvox.com.cn/bbs/viewtopic.php?t=407 .
regards!
james.zhu

not successful under trixbox. i'd try again n again but still the same

i download the misdn source, edit the makefile and recompile, still problem

hello:
have you delete the ko from /kernel/misc/misc? you have to delete it and please disable the isdn from setup->service.
regards!
james.zhu

hello James,

sorry, gone for awhile

Im stuck here .. i just delete netjetpci.ko file from /mISDN-1_1_7/drivers/isdn/hardware/mISDN/. i dont have /kernel/misc/misc*.. where i can delete that. and how can i disable/stop isdn while the module is in use

[/code]
[trixbox1.localdomain 2.6.18-53.1.4.el5-i686]# mISDN stop
-- Unloading mISDN modules --
>> /sbin/modprobe -r --ignore-remove mISDN_dsp hfcmulti mISDN_capi l3udss1 mISDN_l2 mISDN_l1 mISDN_isac
FATAL: Module mISDN_dsp is in use.
>> /sbin/modprobe -r --ignore-remove mISDN_core
FATAL: Module mISDN_core is in use.

hello,
please go to /lib/modules/2.6.XXX/extra, under that dir, there is one module
netjetpci.ko, just remove it.
run: setup->service->isdn(disable it).
after booting, please check the netjetpci.ko by lsmod, make sure it is not there.
regards!
James.zhu