keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about B100/200/400/800 ISDN BRI Cards

B100P PCI card and elastix 2.4.0 [solved]

10 years 2 weeks ago #9606 by rnervi
Figured out to plug the card and have a running system. Not so.
Elastix hardware detector recognizes the card as "Span # 1: ZTHFC1 "HFC-S PCI A ISDN card 0 ["
but hitting "configuration of span" does nothing.
Futhermore, in System Dashboard, card is "seen" bt "not registered". need the card serial number but have an issure for a missing sql table, cannot "register".
Is there a clean step by step how to have the card up and working as per "elastix certified" ?
ty

i] Last edited by rnervi at 2014-4-4 14:41 [/i
10 years 2 weeks ago #9607 by hua
Hi,
sorry to make trouble, Please contact me , I will check it .

Skype : upper.hua

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
10 years 1 week ago #9617 by rnervi
great support from Mr. Upper.hua. this has been solved.
to help everyone here are step by step to reproduce it:

login to system tty
    cd /usr/src

    wget http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/releases/1.3.7/openvox_dahdi-linux-complete-2.8.0+2.8.0.tar.gz

    tar -zxvf openvox_dahdi-linux-complete-2.8.0+2.8.0.tar.gz 

    rm openvox_dahdi-linux-complete-2.8.0+2.8.0.tar.gz 
remove this directory:
/lib/modules/2.6.18-371.6.1.el5/weak-updates/
reinStall dhadi:
    cd dahdi-linux-complete-2.8.0+2.8.0/

    make

    make install

    make config

    amportal stop

    service dahdi stop

    modprobe dahdi

    modprobe zaphfc

    dahdi_genconf 

    dahdi_cfg -v

    dahdi_cfg -vv

then restart system:

shutdown -r now
after all that elastix detects the card.

i] Last edited by rnervi at 2014-4-16 19:21 [/i
Time to create page: 0.047 seconds
Powered by Kunena Forum