keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about B100/200/400/800 ISDN BRI Cards

[SOLVED] - B100E dahdi problems

10 years 7 months ago #8983 by danivh
Hi everyone.We got a box working perfectly with a B100E plus an A400P
Today a co-worker decided to remove the A400P (we don't need it anymore)
The problem was after booting back the box, the B100E stopped working and got our office without phone.
dahdi show channels shows nothing but the pseudo channel:
service dahdi restart
Loading DAHDI hardware modules:
  wctdm:                                                   [  OK  ]
  zaphfc:                                                  [  OK  ]

Running dahdi_cfg:                                         [  OK  ]
amportal restart



STOPPING ASTERISK

STOPPING FOP SERVER
SETTING FILE PERMISSIONS
Permissions OK

STARTING ASTERISK
Asterisk Started

STARTING FOP SERVER
FOP Server Started
localhost*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret        Blocked    State
 pseudo            default                    default                         In Service
; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 26 16:20:33 2013
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER)
group=0,11
context=from-isdn
overlapdial=yes
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
# Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 26 16:20:33 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] " (MASTER)
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=oslec,1-2

# Global data

loadzone        = es
defaultzone     = es
Any help would be very appreciated!

i] Last edited by danivh at 2013-7-27 18:19 [/i
10 years 7 months ago #8984 by danivh
Adding more info:
[root@localhost ~]# dahdi_cfg -vvv
DAHDI Tools Version - 2.4.1

DAHDI Version: 2.4.1.2
Echo Canceller(s): OSLEC
Configuration
======================

SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 03)

3 channels to configure.

Setting echocan for channel 1 to oslec
Setting echocan for channel 2 to oslec
Setting echocan for channel 3 to none

dahdi_scan
[1]
active=yes
alarms=OK
description=HFC-S PCI A ISDN card 0 [TE]
name=ZTHFC1
manufacturer=Cologne Chips
devicetype=HFC-S PCI-A ISDN
location=PCI Bus 03 Slot 01
basechan=1
totchans=3
irq=169
type=digital-TE
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI
framing_opts=CCS
coding=AMI
framing=CCS
10 years 7 months ago #8985 by danivh
Everything working now!
I just had to delete the extensions and trunks not in use corresponding to the removed card. Now it turns up to be obvious, as channel numbers won't match otherwise.
Time to create page: 0.034 seconds
Powered by Kunena Forum