×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
B100/200/400/800 Series
PRI got event: HDLC Abort (6) on D-channel of span every 10 secs
×
Questions about B100/200/400/800 ISDN BRI Cards
PRI got event: HDLC Abort (6) on D-channel of span every 10 secs
Less
More
Posts: 233
Karma: 5
Thank you received: 16
10 years 10 months ago #8516
by hua
Hi
First please check if these notice casued any voice quality .
If you need help please give me remote access and send E-mail (
This email address is being protected from spambots. You need JavaScript enabled to view it. ) to me ,You can contact me directly by the following ways
MSN :
[email protected]
Skype:upper.hua
Gtalk:upper.hua
Best regards
upper
10 years 10 months ago #8520
by gincantalupo
Hi hua,
no, the quality of the voice seems good....just want to know why that message appear and if it means there is an error or strange behavior I cannot detect.
Thank you
Less
More
Posts: 233
Karma: 5
Thank you received: 16
10 years 10 months ago #8522
by hua
HI
Please give me SSH info I will check it.
Best regards
upper
10 years 10 months ago #8536
by gincantalupo
Hi hua,
you are very kind but unfortunately I cannot give you access to it.
Nevertheless, if you have some commands you wanted me to type on the CLI, let me know, I could post the results here.
Giorgio
Less
More
Posts: 233
Karma: 5
Thank you received: 16
10 years 10 months ago #8539
by hua
Hi
Plas give me the output of command "cat /proc/interrupts" .
Best regards
10 years 10 months ago #8541
by gincantalupo
Hi hua,
here it is:
user@pbx:~$ cat /proc/interrupts
CPU0 CPU1
0: 1288 1246 IO-APIC-edge timer
1: 2 0 IO-APIC-edge i8042
3: 6 3 IO-APIC-edge
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 2 2 IO-APIC-edge i8042
16: 0 0 IO-APIC-fasteoi uhci_hcd:usb5
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
20: 373420741 373426011 IO-APIC-fasteoi b4xxp
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
26: 2194895 2207468 PCI-MSI-edge eth0-rx-0
27: 1731122 1731805 PCI-MSI-edge eth0-tx-0
28: 2 1 PCI-MSI-edge eth0
29: 349944 350115 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 40700858 41811783 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 26082 26104 Rescheduling interrupts
CAL: 152844 201755 Function call interrupts
TLB: 135699 137410 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 2489 2489 Machine check polls
ERR: 1
MIS: 0
If you need more, just ask me.
Thank you.
Giorgio
Forum
Telephony Cards Support
B100/200/400/800 Series
PRI got event: HDLC Abort (6) on D-channel of span every 10 secs
Time to create page: 0.031 seconds