keywords: ip pbx voip gateway gsm gateway

× Questions about B100/200/400/800 ISDN BRI Cards

B200P nt mode msn problem

11 years 7 months ago #7160 by leon.sinko
I have B2ooP, centos 5.6, asterisk, freepbx. 1 port TE, 2 port NT.
on NT post i have 2 phones with msn 31 and 32. In asterisk i have 2 extension 31 and 32. ( and tested also 3333) Channel 12-13 and dial DAHDI/12, signalling fxo_ks, context from-internal

when i call to 31, phone 1 and 2 are ringing. not just 31.
when i call 3333 all isdn phones on 2 port ringing.
there is no phone with 3333 msn !?

I'm beginer please help.


; Span 2: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER)
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 9-10
context = default
group = 63
; Span 3: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED
switchtype = euroisdn
signalling = bri_net_ptmp
channel => 12-13
context = default
group = 63
11 years 7 months ago #7163 by Joe.Yung

You might need to note the difference between command line and freepbx webpage.

Could you please show us your dialplan?

11 years 7 months ago #7167 by leon.sinko
11 years 7 months ago #7169 by Joe.Yung

I noted that you've set an ringgroup, please check if you've placed both of extensions 31&32 to the same ringgroup.

Because I can't access your freepbx web page, it's not easy to see all the dialplan setting details.

11 years 7 months ago #7170 by leon.sinko
sory i have no ring group.
I send you connection info in PM.

Greatings. Leon
11 years 7 months ago #7180 by Joe.Yung

You've set two extensions Ervin<31> and Leon<32>, and both of them are being specified as channel 12-13. They will be ringing when placing an inbound call to one of them(Ervin and Leon).

To avoid this, you might need to specify only one channel to Erivn , and another to Leon. They should assign different channels to different extensions.

How about setting them like this?

Ervin ---> channel 12
Leon ---> channel 13.

Time to create page: 0.039 seconds
Powered by Kunena Forum