keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A810/1610/2410 Advanced Analog Interface Card

How to configure EC module

11 years 5 months ago #8403 by h.rezaei
Hello guys
I bought a 1610 p with EC module and my voip server is Elastix
how to configure EC Module in Elastix
the EC Module is OpenVox EC2032
11 years 5 months ago #8406 by chunlei.yi
hi,

first,please run rm -rf /lib/modules/2.6(your kernel)/dahdi/ to delect the original dahdi drivers, then update your dahdi using the following links driver.
downloads.openvox.cn/pub/drivers/dahdi-l...2.4.1.2+2.4.1.tar.gz
you can see the EC status (inactive to active) using the command cat /proc/dahdi/1 when you are call out.
if still have problem, please contact me via the following IM tools

msn: This email address is being protected from spambots. You need JavaScript enabled to view it.
skype: chunlei.yi
Time to create page: 0.053 seconds
Powered by Kunena Forum