- Thank you received: 0
keywords: ip pbx voip gateway gsm gateway
# Autogenerated by /usr/sbin/dahdi_genconf on Thu Dec 13 16:19:32 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
fxsks=3
echocanceller=mg2,3
fxsks=4
echocanceller=mg2,4
# Span 2: opvxg4xx/0/1 "OpenVox G400P GSM/CDMA PCI Card 0" AMI/CCS
span=2,1,0,ccs,ami
# termtype: unknown
bchan=5
hardhdlc=6
echocanceller=mg2,5
# Span 3: opvxg4xx/0/2 "OpenVox G400P GSM/CDMA PCI Card 0" AMI/CCS
span=3,2,0,ccs,ami
# termtype: unknown
bchan=7
hardhdlc=8
echocanceller=mg2,7
# Span 4: opvxg4xx/0/3 "OpenVox G400P GSM/CDMA PCI Card 0" AMI/CCS
span=4,3,0,ccs,ami
# termtype: unknown
bchan=9
hardhdlc=10
echocanceller=mg2,9
# Span 5: opvxg4xx/0/4 "OpenVox G400P GSM/CDMA PCI Card 0" AMI/CCS
span=5,4,0,ccs,ami
# termtype: unknown
bchan=11
hardhdlc=12
echocanceller=mg2,11
# Global data
loadzone = uk
defaultzone = uk
[channels]
loadzone=uk
defaultzone=uk
usecallerid=yes
ukcallerid=yes
cidsignalling=v23 ; Added for UK CLI detection
cidstart=polarity ; Added for UK CLI detection
sendcalleridafter=1
callerid=asreceived ; propagate the CID received from BT.
busydetect=yes
busycount=3
context=from-pstn
signalling=fxs_ks
rxwink=300
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3
immediate=no
#include dahdi-channels.conf
; Autogenerated by /usr/sbin/dahdi_genconf on Thu Dec 13 16:19:32 2012
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;
; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
;;; line="1 WCTDM/4/0 FXSKS (In use) (EC: MG2 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default
;;; line="2 WCTDM/4/1 FXSKS (In use) (EC: MG2 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default
;;; line="3 WCTDM/4/2 FXSKS (In use) (EC: MG2 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
;;; line="4 WCTDM/4/3 FXSKS (In use) (EC: MG2 - INACTIVE)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
callerid=
group=
context=default
[from-pstn]
exten => s,1,Answer()
exten => s,n,Playback(tt-monkeys)
exten => s,n,Hangup()
[from-internal]
exten => 200X.,1,Dial(DAHDI/1/${EXTEN:3})
exten => 200X.,2,Hangup
CLI>
== Using SIP RTP CoS mark 5
-- Executing [200@from-internal:1] Dial("SIP/1111-0000000a", "DAHDI/1/01216209152") in new stack
[Dec 13 17:25:56] WARNING[11778]: app_dial.c:2341 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 17 - User busy)
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing [200@from-internal:2] Hangup("SIP/1111-0000000a", "") in new stack
== Spawn extension (from-internal, 200, 2) exited non-zero on 'SIP/1111-0000000a'
Starting post polarity CID detection on channel 1
-- Starting simple switch on 'DAHDI/1-1'
[Dec 13 17:26:51] ERROR[11781]: callerid.c:566 callerid_feed: No start bit found in fsk data.
[Dec 13 17:26:51] WARNING[11781]: chan_dahdi.c:1772 my_get_callerid: Failed to decode CallerID
[Dec 13 17:26:55] WARNING[11781]: sig_analog.c:2501 __analog_ss_thread: CID timed out waiting for ring. Exiting simple switch
-- Hanging up on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'
== Starting post polarity CID detection on channel 1
-- Starting simple switch on 'DAHDI/1-1'