Problem with A800 some FXS ports dont works after cold restart

On a Trixbox server with an A800 installed with 3FXO/5FXS I have this problem:
When you switch on the power supply, the system restart but some ports of the A800 fails..
typing the command dahdi_scan i can see some port in failure.

# dahdi_scan
[1]
active=yes
alarms=OK
description=OpenVox A1200P/A800P Board 13
name=OPVXA1200/12
manufacturer=OpenVox
devicetype=OpenVox A1200P/A800P
location=PCI Bus 05 Slot 01
basechan=1
totchans=8
irq=169
type=analog
port=1,FXS
port=2,FXS FAILED
port=3,FXS
port=4,FXS
port=5,FXS
port=6,FXO
port=7,FXO
port=8,FXO


In this condition if i exec one or more hot "reboot" from console, the system restart and the ports go OK.

hi,
Does the specified port fail to load? please poweroff and reinstall the fxs modules to try.
You can stop asterisk then run service dahdi stop and service dahdi start command to reload the modules.
if still have problem, please contact me via the following IM tools.

msn: This email address is being protected from spambots. You need JavaScript enabled to view it.
skype: chunlei.yi

You mean i have to unmount and remount the board??ok no..just reinstall the module.. i will try.. thanks

i] Last edited by ptrenta at 2012-11-19 18:53 [/i