×
Notice
The forum is in read only mode.
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
need pause in pulse dialing
×
Questions about A400/800/1200 Analog Interface Card
need pause in pulse dialing
11 years 8 months ago #8284
by serg544
I use:
openvox A800P with 2 FXO100
ubuntu 12.04
openvox_dahdi_complete_2.6.0
asterisk 1.8.15
freepbx 2.9
openvox card connected to old phone lines, which supports only pulse dialling.
local calls is OK, but for long-distance calls i need pause after 8.
so i set outbound dial prefix = 8wwwwww in freepbx/
in a asterisk console a see correct dial command:
Dial(DAHDI/G1/8wwwwww0293834927,60)
but the call does not pass.
in other forums i read that, different dahdi versions don`t support pause('w' in dial comand) with pulse dialling..
Is openvox_dahdi_complete_2.6.0 support pauses with pulse dialling? May be i need some patch for dahdi?
Please help.
best regards:) .
Less
More
-
Posts: 233
-
Karma: 5
-
Thank you received: 16
-
-
11 years 8 months ago #8285
by hua
Hi
Please change this line in chan_dahdi.conf file :
;pulsedial=yes /remove this line/
pulsedial=yes /add this line/
Then have a try,My MSN is This email address is being protected from spambots. You need JavaScript enabled to view it.
Best regards
upper.hua
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
need pause in pulse dialing
Time to create page: 0.032 seconds