BIOS Setup in IPC 110

Hi,

How can we access the BIOS setup in a IPC-110 ?


[]s,
Luciano

Hi Luciano,

You have two methods to do that.

1.Creatie a serial interface cable and connect it with your PC machine by a hyperterminal. Default baud rate is 115200.

2.Buy our accessor ACC1005(VGA interface) so that you will be able to access directly by monitor.

i] Last edited by Joe.Yung at 2011-12-5 09:46 [/i

Good Day
I have an issue with the relevant board.

I am connecting my rs232 console cable but i cannot see any output from the POST procedure. When i power on the board i see nothing and after a few seconds the only thing i see is :

Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key

I press enter and the message just comes back.

Any ideas?

Thanks

Hi Tripialos,

please see this link: http://bbs.openvox.cn/viewthread.php?tid=2083&pid=8722.