keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about UC Series / IX140 / IX210 IPPBX

Can't get SIP Trunk to register

6 years 9 months ago - 6 years 9 months ago #11561 by rudimaynard
Hi, I am trying to get a SIP trunk to register on an MC100 but am not having any luck, this is what I have configured for my registration trunk (minus user name, pw, ip info):

host=x.x.x.x
fromuser=2974513999
username=2974513999
secret=93933inA2974513999
fromdomain=x.x.x.x
type=friend
context=from-trunk
insecure=port,invite
trustrpid=yes
sendrpid=yes
directmedia=no
qualify=yes
keepalive=45
dtmfmode=rfc2833
disallow=all
allow=g729

Register string is 2974513999:[email protected]

The system has IP connectivity to the internet, but it does not even ATTEMPT to register from what I can tell when running a packet capture (it sends no registration requests out). I assume that there is something very basic in the configuration that I am missing (I am a novice when it comes to Elastix)... Any advice would be appreciated, thanks.
6 years 9 months ago #11562 by rudimaynard
As suspected, the issue was simple... default gateway and DNS servers were not set correctly in the Network settings, fixed that and my trunk registered.
Time to create page: 0.047 seconds
Powered by Kunena Forum