keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

filesystem issue (squashfs_read_data failed)

7 years 7 months ago #11159 by it-orion
Hi,
the web interface for gsm gateway is broken, because some files are not available / readable. The gateway is still working, but it is not possible to change a configuration.

On gateway filesystem, some files are empty, some of them not readable - please check the screenshots

Please suggest how can I recover the gw




Attachments:
7 years 7 months ago #11160 by lindali
Hi sir,

Please follow steps below to solve it:
step1: donwload the firmware 2.2.2 and upload it to gsm gateway via winscp(If you don't have winscp, please download and install one. Use SCP protocol, username/pwd are same with ssh username/pwd)
www.openvox.cn/pub/firmwares/GSM%20Gateway/wg400-current.img (2.2.2 middle version)
step2: login gsm gateway in ssh way.
step3: run command: auto_update -u -f wg400-current.img
step4: run command "/my_tools/safe_reboot " to apply new firmware.
step5: after gsm gateway is up, please update the firmware to final version 2.3.1. (2.2.2 is middle version for updating)
www.openvox.cn/pub/firmwares/GSM%20Gateway/wg400-current.bin (2.3.1 final version)

Wish this will help you. If you still have problem, you can contact me via skype.
Best regards,
skype: linda.li258
email: This email address is being protected from spambots. You need JavaScript enabled to view it.
7 years 4 months ago #11293 by factor
I have same issue.
But i haven't command "/my_tools/safe_reboot " in my gw.
@Openvox-Wireless-Gateway:/$ cd my_tools/
@Openvox-Wireless-Gateway:/my_tools$ ls -la
ls: cannot open '.': Permission denied
@Openvox-Wireless-Gateway:/my_tools$
how i can update?, and how to see what version there is now on board?
P.S. Sorry for my english.
7 years 4 months ago #11294 by factor
I found out that I do not have Root access to the gateway. But I can not make it through the web, as it does not open :)
Can I somehow get the root access via ssh? Or do I update the gateway without root access?
Will web interface start working after gateway reset to default settings?
7 years 4 months ago - 7 years 4 months ago #11295 by heizi.lv
hi ,
1)Can I somehow get the root access via ssh?
have you changed your password of ssh login ? if not ,you can login as super user .(username:super)
2) do I update the gateway without root access?
you need root access to update it.
3) Will web interface start working after gateway reset to default settings?
it can not .
if you have another problems ,you can add my skype : This email address is being protected from spambots. You need JavaScript enabled to view it. . i will help you via remote .
Time to create page: 0.701 seconds
Powered by Kunena Forum