keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about VS-GW2120/GW1600/GW1202 and WGW1002G GSM Series VoIP Gateway

imei not changen on gsm 1.2, 1.3, 1.4

8 years 3 months ago #10764 by envoy
Hi
I have promblen with changes on 2-3 ports gsm imai on VS-GW1600-4G

they set imei 354781030000000 and this is parameter not changed
sim card registred on network but calls not working

D-channel: 4
Status: Power on, Provisioned, Undetected SIM Card, Active, Standard
Type: CPE
Manufacturer: SIMCOM_Ltd
Model Name: SIMCOM_SIM840W
Model IMEI: 354781030000000
Revision: Revision:1116B01SIM840W16_MXIC_OPENVOX
Network Name:
Network Status: Not registered
Signal Quality (0,31): -1
BER value (0,7): -1
SIM IMSI:
SIM SMS Center Number:
Own Number:
Remain Time:
PDD: 0
ASR: 0
ACD: 0
8 years 3 months ago #10765 by crystal.han
Hi,
Please add my skype ID :crystalhan6,i will help you to check it.
The following user(s) said Thank You: envoy
8 years 3 months ago #10766 by envoy
The problem solved by upgrading the firmware modules GSM. Thanks to the support for help.
7 years 4 months ago #11299 by Dobromyr
I have the same problem
I need updrade modules GSM
I press "Entry Remote COM", run RemoteCom, try connect to IP, but i see error "SetupOpenInfFile(C:\Windows\System32\com0com.inf"
What driver I must install?
7 years 4 months ago #11300 by hua
Hello,

Please send E-mail to This email address is being protected from spambots. You need JavaScript enabled to view it. . We will give you the steps and the update tools

Best regards
upper.
7 years 4 months ago #11306 by lindali
Hi sir,

To update firmware of ports, you need prepare pc with system winXP or win7 with 32 bits. And the pc should be in same network with your gsm gateway.
When you are ready, you can contact me via skype. My skype id is linda.li258

Best Regards,
Linda
email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Time to create page: 0.044 seconds
Powered by Kunena Forum