keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about D130/230/430/830/1630 Advanced T1/E1/J1 PRI Cards

About this error,Pls Help

9 years 11 months ago #9686 by markgo
Hi,
我在sip.conf裏這樣配置:B:
[general]
;srvlookup=yes
disallow=all
allow=ulaw
allow=alaw ;G711 64k better voice
tos=0x68
; Reported as required for Asterisk 1.4
notifyringing=yes
notifyhold=yes
limitonpeers=yes
faxdetect=yes
jbenable=yes
jbforce=no
jbmaxsize=300
jbresyncthreshold=500
jbimpl=adaptive
jbtargetextra=40
jblog=no


[17]
type=friend
host=192.168.1.7
dtmfmode=rfc2833
nat=no
context=from-zap
qualify=yes
faxdetect=yes
canreinvite=no
disallow=all
allow=alaw
allow=ulaw




而A是这样配置
[general]
disallow=all
allow=ulaw
allow=alaw ;G711 64k better voice

;tos=0x68
; Reported as required for Asterisk 1.4
notifyringing=yes
notifyhold=yes
limitonpeers=yes
faxdetect=yes
jbenable=yes
jbforce=yes
jbmaxsize=300
jbresyncthreshold=1000
jbimpl=adaptive
jblog=no


[254]
type=friend
host=192.168.2.54
dtmfmode=rfc2833
nat=no
context=harris
qualify=yes
faxdetect=yes
canreinvite=no
disallow=all
allow=alaw
allow=ulaw




平時通話中都是正常的,但是偶爾出現問題。截取了出問題時候的LOG:
[May 14 21:06:02] VERBOSE[509] logger.c: -- SIP/254-000200f0 is circuit-busy
[May 14 21:06:02] VERBOSE[509] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[May 14 21:20:09] VERBOSE[590] logger.c: -- SIP/254-0002010b is circuit-busy
[May 14 21:20:09] VERBOSE[590] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[May 14 21:27:23] VERBOSE[603] logger.c: -- SIP/254-00020110 is circuit-busy
[May 14 21:27:23] VERBOSE[603] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[May 14 21:27:40] VERBOSE[604] logger.c: -- SIP/254-00020111 is circuit-busy
[May 14 21:27:40] VERBOSE[604] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[May 14 21:30:13] VERBOSE[606] logger.c: -- DAHDI/62-1 is circuit-busy
[May 14 21:30:13] VERBOSE[606] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[May 14 21:30:37] VERBOSE[613] logger.c: -- DAHDI/62-1 is circuit-busy
[May 14 21:30:37] VERBOSE[613] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[May 14 21:51:48] VERBOSE[733] logger.c: -- SIP/254-00020123 is circuit-busy
[May 14 21:51:48] VERBOSE[733] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[May 14 22:09:48] VERBOSE[780] logger.c: -- SIP/254-00020139 is circuit-busy
[May 14 22:09:48] VERBOSE[780] logger.c: == Everyone is busy/congested at this time (1:0/1/0)


兩邊都是基本一樣的日誌,我也上網找了,
有些說dialplan配置錯誤,但是配置錯誤就不會出現偶爾打不通的情況吧...
請問我該如何解決這個問題/.?
另外[align=center]Everyone is busy/congested at this time (1:0/1/0)裏的(1:0/1/0)請問是什麼意思?[/align]


[align=center]線路接入圖如下:[/align]
[align=center]PRI => A =>sip => B => PRI => PSTN[/align]
[align=center]謝謝。[/align]
9 years 11 months ago #9687 by hua
Hi
什么型号的数字卡,并发大概有多少线?可以给远程我们上去检查下!

upper
9 years 11 months ago #9688 by markgo
謝謝,已經聯繫upper解決了...
D430的卡..
Time to create page: 0.037 seconds
Powered by Kunena Forum