keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about D-110P 1 Span E1/T1/J1 Interface Card

HDLC Receiver overrun on channel......

16 years 2 weeks ago #853 by rcuadra
I have this error in asterisk console
HDLC Receiver overrun on channel......

When I tried to make I call, the first time the outside phone is riging, but when I answer, I hear alot of noise.
When I tried to make next call, the PBX told me all channel is busy now, please tried you call later.

Zaptel.conf
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16

# Global data

loadzone = us
defaultzone = us



Zaptel.conf
; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
group=0
context=default


The conection is E1 ISDN PRI with OpenVox and Alcatel OmniPCX Office
16 years 2 weeks ago #855 by james.zhu
hello, rcuadra:
please give us your logs and console info, check the signaling. are you sure it is a pri_net?
Regards!
james.zhu

16 years 2 weeks ago #856 by rcuadra
[root@elastix ~]# asterisk -vvvvvvr
Asterisk 1.4.18, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <This email address is being protected from spambots. You need JavaScript enabled to view it.>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Connected to Asterisk 1.4.18 currently running on elastix (pid = 3316)
Verbosity is at least 6
-- Executing [200@from-internal] Macro("SIP/1000-08706e00", "dialout-trunk|1|200||") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "DIAL_TRUNK=1") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "DIAL_NUMBER=200") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "ROUTE_PASSWD=") in new stack
-- Executing [s@macro-dialout-trunk] GotoIf("SIP/1000-08706e00", "1?noauth") in new stack
-- Goto (macro-dialout-trunk,s,6)
-- Executing [s@macro-dialout-trunk] GotoIf("SIP/1000-08706e00", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "_NODEST=") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "GROUP()=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk] Macro("SIP/1000-08706e00", "user-callerid|SKIPTTL") in new stack
-- Executing [s@macro-user-callerid] NoOp("SIP/1000-08706e00", "user-callerid: device 1000") in new stack
-- Executing [s@macro-user-callerid] Set("SIP/1000-08706e00", "AMPUSER=1000") in new stack
-- Executing [s@macro-user-callerid] GotoIf("SIP/1000-08706e00", "0?report") in new stack
-- Executing [s@macro-user-callerid] GotoIf("SIP/1000-08706e00", "0?start") in new stack
-- Executing [s@macro-user-callerid] Set("SIP/1000-08706e00", "REALCALLERIDNUM=1000") in new stack
-- Executing [s@macro-user-callerid] NoOp("SIP/1000-08706e00", "REALCALLERIDNUM is 1000") in new stack
-- Executing [s@macro-user-callerid] Set("SIP/1000-08706e00", "AMPUSER=1000") in new stack
-- Executing [s@macro-user-callerid] Set("SIP/1000-08706e00", "AMPUSERCIDNAME=Prueba") in new stack
-- Executing [s@macro-user-callerid] GotoIf("SIP/1000-08706e00", "0?report") in new stack
-- Executing [s@macro-user-callerid] Set("SIP/1000-08706e00", "AMPUSERCID=1000") in new stack
-- Executing [s@macro-user-callerid] Set("SIP/1000-08706e00", "CALLERID(all)="Prueba" <1000>") in new stack
-- Executing [s@macro-user-callerid] Set("SIP/1000-08706e00", "REALCALLERIDNUM=1000") in new stack
-- Executing [s@macro-user-callerid] NoOp("SIP/1000-08706e00", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid] GotoIf("SIP/1000-08706e00", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid] NoOp("SIP/1000-08706e00", "Using CallerID "Prueba" <1000>") in new stack
-- Executing [s@macro-dialout-trunk] Macro("SIP/1000-08706e00", "record-enable|1000|OUT") in new stack
-- Executing [s@macro-record-enable] GotoIf("SIP/1000-08706e00", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable] AGI("SIP/1000-08706e00", "recordingcheck|20080401-195754|1207101474.11") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20080401-195754|1207101474.11: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable] NoOp("SIP/1000-08706e00", "No recording needed") in new stack
-- Executing [s@macro-dialout-trunk] GotoIf("SIP/1000-08706e00", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk] Macro("SIP/1000-08706e00", "outbound-callerid|1") in new stack
-- Executing [s@macro-outbound-callerid] GotoIf("SIP/1000-08706e00", "1?start") in new stack
-- Goto (macro-outbound-callerid,s,3)
-- Executing [s@macro-outbound-callerid] NoOp("SIP/1000-08706e00", "REALCALLERIDNUM is 1000") in new stack
-- Executing [s@macro-outbound-callerid] GotoIf("SIP/1000-08706e00", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,9)
-- Executing [s@macro-outbound-callerid] Set("SIP/1000-08706e00", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid] Set("SIP/1000-08706e00", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid] Set("SIP/1000-08706e00", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid] GotoIf("SIP/1000-08706e00", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,16)
-- Executing [s@macro-outbound-callerid] GotoIf("SIP/1000-08706e00", "1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,18)
-- Executing [s@macro-outbound-callerid] GotoIf("SIP/1000-08706e00", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,22)
-- Executing [s@macro-outbound-callerid] NoOp("SIP/1000-08706e00", "CallerID set to "Prueba" <1000>") in new stack
-- Executing [s@macro-dialout-trunk] GotoIf("SIP/1000-08706e00", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk] AGI("SIP/1000-08706e00", "fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
fixlocalprefix: Could not open /etc/asterisk/localprefixes.conf
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "OUTNUM=200") in new stack
-- Executing [s@macro-dialout-trunk] Set("SIP/1000-08706e00", "custom=ZAP/g0") in new stack
-- Executing [s@macro-dialout-trunk] GotoIf("SIP/1000-08706e00", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,24)
-- Executing [s@macro-dialout-trunk] GotoIf("SIP/1000-08706e00", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk] Dial("SIP/1000-08706e00", "ZAP/g0/200|300|") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g0/200
== Primary D-Channel on span 1 down
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk] Goto("SIP/1000-08706e00", "s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk] GotoIf("SIP/1000-08706e00", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk] NoOp("SIP/1000-08706e00", "TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks") in new stack
-- Executing [200@from-internal] Macro("SIP/1000-08706e00", "outisbusy|") in new stack
-- Executing [s@macro-outisbusy] Playback("SIP/1000-08706e00", "all-circuits-busy-now|noanswer") in new stack
-- <SIP/1000-08706e00> Playing 'all-circuits-busy-now' (language 'en')
-- Executing [s@macro-outisbusy] Playback("SIP/1000-08706e00", "pls-try-call-later|noanswer") in new stack
-- <SIP/1000-08706e00> Playing 'pls-try-call-later' (language 'en')
== Primary D-Channel on span 1 down
== Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/1000-08706e00' in macro 'outisbusy'
== Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/1000-08706e00'
elastix*CLI>
16 years 2 weeks ago #857 by james.zhu
hi:
could you check the pri debug in asterisk console? it should be up and active.
Regards!
james.zhu

16 years 2 weeks ago #860 by miaolin
are your card D110P or D110PG? to check it, please mail ssh to This email address is being protected from spambots. You need JavaScript enabled to view it. or post the last 30 line of /var/log/messages after run modprobe wcte11xp.
16 years 2 weeks ago #861 by rcuadra
Apr 1 17:30:56 elastix kernel: zaptel: no version for "oslec_echo_can_traintap" found: kernel tainted.
Apr 1 17:30:56 elastix kernel: Zapata Telephony Interface Registered on major 196
Apr 1 17:30:56 elastix kernel: Zaptel Version: 1.4.9.2-Xorcom-trunk-r5517
Apr 1 17:30:56 elastix kernel: Zaptel Echo Canceller: OSLEC
Apr 1 17:30:56 elastix kernel: Zaptap registered 'sample' char driver on major 33
Apr 1 17:30:56 elastix kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 225
Apr 1 17:30:56 elastix kernel: FALC version: 00000005
Apr 1 17:30:56 elastix rpc.statd[2286]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
Apr 1 17:30:56 elastix kernel: TE110P: Setting up global serial parameters for E1 FALC V2.2
Apr 1 17:30:56 elastix kernel: TE110P: Successfully initialized serial bus for card
Apr 1 17:30:56 elastix kernel: Found a Wildcard: Digium Wildcard TE110P T1/E1
Apr 1 17:30:56 elastix kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr 1 17:30:56 elastix kernel: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Apr 1 17:30:56 elastix kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 233
Apr 1 17:30:56 elastix kernel: FDC 0 is a post-1991 82077
Apr 1 17:30:56 elastix kernel: lp0: using parport0 (interrupt-driven).
Apr 1 17:30:56 elastix kernel: lp0: console ready
Apr 1 17:30:56 elastix kernel: ACPI: Power Button (FF) [PWRF]
Apr 1 17:30:56 elastix kernel: ACPI: Power Button (CM) [PWRB]
Apr 1 17:30:56 elastix kernel: ACPI: Sleep Button (CM) [SLPB]
Apr 1 17:30:56 elastix kernel: ibm_acpi: ec object not found
Apr 1 17:30:56 elastix kernel: md: Autodetecting RAID arrays.
Apr 1 17:30:56 elastix kernel: md: autorun ...
Apr 1 17:30:56 elastix kernel: md: ... autorun DONE.
Apr 1 17:30:56 elastix kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: This email address is being protected from spambots. You need JavaScript enabled to view it.
Apr 1 17:30:56 elastix kernel: EXT3 FS on sda2, internal journal
Apr 1 17:30:56 elastix kernel: kjournald starting. Commit interval 5 seconds
Apr 1 17:30:56 elastix kernel: EXT3 FS on sda1, internal journal
Apr 1 17:30:56 elastix kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 1 17:30:56 elastix kernel: Adding 779144k swap on /dev/sda3. Priority:-1 extents:1 across:779144k
Apr 1 17:30:56 elastix kernel: Registered tone zone 0 (United States / North America)
Apr 1 17:30:56 elastix kernel: TE110P: Span configured for CCS/HDB3/CRC4
Apr 1 17:30:56 elastix kernel: Calling startup (flags is 4099)
Apr 1 17:30:56 elastix kernel: r8169 Gigabit Ethernet driver 6.005.00-NAPI loaded
Apr 1 17:30:56 elastix kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 21 (level, low) -> IRQ 217
Apr 1 17:30:56 elastix kernel: eth0: RTL8169SC/8110SC at 0xf885a000, 00:16:17:b4:48:9b, IRQ 217
Apr 1 17:30:56 elastix kernel: r8169: eth0: link down
Apr 1 17:30:56 elastix kernel: r8169: eth0: link up
Apr 1 17:30:56 elastix kernel: audit(1207092655.521:3): audit_pid=2203 old=0 by auid=4294967295
Apr 1 17:30:57 elastix kernel: NET: Registered protocol family 10
Apr 1 17:30:57 elastix kernel: lo: Disabled Privacy Extensions
Apr 1 17:30:57 elastix kernel: IPv6 over IPv4 tunneling driver
Apr 1 17:30:58 elastix xinetd[2439]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Apr 1 17:30:58 elastix xinetd[2439]: Started working: 1 available service
Apr 1 17:30:58 elastix ntpd[2478]: ntpd This email address is being protected from spambots. You need JavaScript enabled to view it. Wed Mar 14 21:18:33 UTC 2007 (1)
Apr 1 17:30:58 elastix ntpd[2479]: precision = 1.000 usec
Apr 1 17:30:58 elastix ntpd[2479]: Listening on interface wildcard, 0.0.0.0#123 Disabled
Apr 1 17:30:58 elastix ntpd[2479]: Listening on interface wildcard, ::#123 Disabled
Apr 1 17:30:58 elastix ntpd[2479]: Listening on interface lo, ::1#123 Enabled
Apr 1 17:30:58 elastix ntpd[2479]: bind() fd 19, family 10, port 123, scope 2, addr fe80::216:17ff:feb4:489b, in6_is_addr_multicast=0 flags=1 fails: Cannot assign requested address
Apr 1 17:30:58 elastix ntpd[2479]: Listening on interface lo, 127.0.0.1#123 Enabled
Apr 1 17:30:58 elastix ntpd[2479]: Listening on interface eth0, 192.168.25.72#123 Enabled
Apr 1 17:30:58 elastix ntpd[2479]: kernel time sync status 0040
Apr 1 17:30:58 elastix ntpd[2479]: frequency initialized 180.313 PPM from /var/lib/ntp/drift
Apr 1 17:31:05 elastix kernel: no echo canceller being monitored - make a new call
Apr 1 17:31:07 elastix FaxQueuer[2947]: HylaFAX (tm) Version 4.3.3
Apr 1 17:31:07 elastix FaxQueuer[2947]: Copyright (c) 1990-1996 Sam Leffler
Apr 1 17:31:07 elastix FaxQueuer[2947]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
Apr 1 17:31:08 elastix HylaFAX[2950]: HylaFAX INET Protocol Server: restarted.
Apr 1 17:31:08 elastix saslauthd[2982]: detach_tty : master pid is: 2982
Apr 1 17:31:08 elastix saslauthd[2982]: ipc_init : listening on socket: /var/run/saslauthd/mux
Apr 1 17:31:21 elastix kernel: HDLC Receiver overrun on channel WCT1/0/16 (master=WCT1/0/16)
Apr 1 17:31:59 elastix kernel: HDLC Receiver overrun on channel WCT1/0/16 (master=WCT1/0/16)
Apr 1 17:33:36 elastix last message repeated 2 times
Apr 1 17:34:17 elastix ntpd[2479]: synchronized to LOCAL(0), stratum 10
Apr 1 17:34:17 elastix ntpd[2479]: kernel time sync enabled 0001
Apr 1 17:35:22 elastix ntpd[2479]: synchronized to 138.23.180.126, stratum 2
Apr 1 17:39:41 elastix ntpd[2479]: synchronized to 200.23.51.205, stratum 1
Apr 1 17:51:20 elastix ntpd[2479]: time reset -0.589195 s
Apr 1 17:55:05 elastix ntpd[2479]: synchronized to LOCAL(0), stratum 10
Apr 1 17:56:45 elastix ntpd[2479]: synchronized to 200.23.51.205, stratum 1
Apr 1 18:17:56 elastix dhclient: DHCPREQUEST on eth0 to 192.168.25.12 port 67
Apr 1 18:17:56 elastix dhclient: DHCPACK from 192.168.25.12
Apr 1 18:17:56 elastix dhclient: bound to 192.168.25.72 -- renewal in 2977 seconds.
Apr 1 19:07:33 elastix dhclient: DHCPREQUEST on eth0 to 192.168.25.12 port 67
Apr 1 19:07:33 elastix dhclient: DHCPACK from 192.168.25.12
Apr 1 19:07:33 elastix dhclient: bound to 192.168.25.72 -- renewal in 3316 seconds.
Apr 1 20:02:49 elastix dhclient: DHCPREQUEST on eth0 to 192.168.25.12 port 67
Apr 1 20:02:49 elastix dhclient: DHCPACK from 192.168.25.12
Apr 1 20:02:49 elastix dhclient: bound to 192.168.25.72 -- renewal in 2921 seconds.
Apr 1 20:51:30 elastix dhclient: DHCPREQUEST on eth0 to 192.168.25.12 port 67
Apr 1 20:51:30 elastix dhclient: DHCPACK from 192.168.25.12
Apr 1 20:51:30 elastix dhclient: bound to 192.168.25.72 -- renewal in 2866 seconds.
Apr 1 21:39:16 elastix dhclient: DHCPREQUEST on eth0 to 192.168.25.12 port 67
Apr 1 21:39:16 elastix dhclient: DHCPACK from 192.168.25.12
Apr 1 21:39:16 elastix dhclient: bound to 192.168.25.72 -- renewal in 2960 seconds.
Time to create page: 0.042 seconds
Powered by Kunena Forum