Dahdi without ringing tone

Hi James,

please make sure you have a right dialplan for that. what you mean by "Called g2/<number>"?
Thats the right number! the <number> stayes for a real number.

do you have a group 2 in your zapata.conf, does the system fit a number as your number in your dialplan?
thats right, i have a group 2 in chan_dahdi.conf and no the system dosen't fit a exact number in dialplan.
We work at this part in the dialplan with regular expressions.
for example:

_X.* for calls from SIP to Alcatel.
_0XX.* for calls from SIP to telco.
But this is not the problem.

Here is the Call. And now ??
== Using UDPTL CoS mark 5
-- Executing [211@sip:1] Dial("SIP/223-b570a3e8", "DAHDI/g2/339933") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g2/339933
-- Channel 0/1, span 1 got hangup, cause 1
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)

did you know the problem of this?

case 1 is this: 1 unallocated number, please check from:
http://www.voip-info.org/wiki/view/Asterisk+variable+hangupcause
have you set pridialplan and prilocaldialplan? please try to set different values for trying.
james.zhu

Hi James,

yes we set the pridialplan to local
pridialplan=local

ok i try it.
I let you know about this.

thx in advance

hello，
please make sure your pri is up and active when you dial out. run the pri show spans to check that.
regards!
James.zhu

Hi Jmaes,

nothing change,

Result is:

pridialplan
unknown work but without ringing
local work but without ringing
private not working
natinal not working
international not working

pri show spans:
PRI span 1/0: Provisioned, Up, Active
PRI span 2/0: Provisioned, Up, Active

so the problem is up to date, and not fixed.

if you had any idea, please let me know.

thx in advance for a answear.

regards patrick

please give me the ssh and chat with me(This email address is being protected from spambots. You need JavaScript enabled to view it.).
regards!
James.zhu