D210P - ZT_SPANCONFIG failed on span 1: Invalid argument (22)

Why I ask is because if I modprobe zaptel and modprobe wct4xxp then do a ztscan, it thinks the card is using E1's instead of T1's.

But maybe that is because ztcfg cannot run?

[1]
active=yes
alarms=UNCONFIGURED
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE210P
location=Board ID Switch 0
basechan=1
totchans=31
irq=114
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=
framing=
[2]
active=yes
alarms=UNCONFIGURED
description=T2XXP (PCI) Card 0 Span 2
name=TE2/0/2
manufacturer=Digium
devicetype=Wildcard TE210P
location=Board ID Switch 0
basechan=32
totchans=31
irq=114
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=
framing=

Our cards default set to E1, did you set the jumper to T1 before install it in to PC

That would appear to be the problem. Please close this thread. Thank you.