Elastix 1.3-2 + DE410Px4張的問題

你要按照我给的办法设置，每个板卡的4个span分别是1,2,3,4，不需要超过5。

ok了~~~謝謝:lol

再請教一個問題 DE410P 的硬体回音消除，我要怎麼知道有沒有開啟這個功能。

hello,
如果驱动加载以后，你可以运行 dmesg 会显示 vpm 成功这类的信息。这个信息表示那个功能已经开启了。
regards!
James.zhu

/etc/asterisk/zapata.conf 以下這三個這樣設定對嗎？

echocancel=yes
echocancelwhenbridged=yes
echotraining=yes

這是我執行後的結果，正確嗎？

TE4XXP: Span 1 configured for CCS/HDB3
timing source auto card 0!
SPAN 1: Primary Sync Source
VPM400: Not Present
VPM450: firmware zaptel-fw-oct6114-128.bin not available from userspace
Completed startup!
About to enter startup!
TE4XXP: Span 2 configured for CCS/HDB3
SPAN 2: Secondary Sync Source
VPM400: Not Present
VPM450: firmware zaptel-fw-oct6114-128.bin not available from userspace
Completed startup!
About to enter startup!
TE4XXP: Span 3 configured for CCS/HDB3
Zaptel: Master changed to TE4/0/3
SPAN 3: Tertiary Sync Source
VPM400: Not Present
VPM450: firmware zaptel-fw-oct6114-128.bin not available from userspace
Completed startup!
About to enter startup!
TE4XXP: Span 4 configured for CCS/HDB3
SPAN 4: Quaternary Sync Source
VPM400: Not Present
VPM450: firmware zaptel-fw-oct6114-128.bin not available from userspace
Completed startup!