Hi,
today I tried testing again and what I get is:
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PMP L2Link UP L1Link:DOWN Blocked:0 Debug:0
They were both up last time! This is driving me nuts. Is this e telco problem again?
OK RESOLVED (i guess someone was talking on the phone using the analog port)
Sorry for the "stupid" question.
And as for the calls, I am a trixbox newbie so I maybe make some mistakes there but I'll figure out incoming and aoutgoing routes sooner or later.
Hi,
I am sorry to say that I have some major problems, I guess it might be on the trixbox side but this is what happens:
After some time of operating (random) trixbox gives the "all cisrcuits are busy" message and calls cannot be placed. Calls can take place again only after rebooting the system!
Also, when the system functions, when operators use attended transfer (*2) what they get is the external call ok but non sound going out and the phonecall drops. Unattended is fine though.
Hi:
When you get "all cisrcuits are busy" message , please try to restart asterisk. if your system can work after restart asterisk, this explains the problem is the version of the asterisk, then you can change another version to have a try.
I want to know what card are you using? Would you mind sending you SSH to me ? If yes, I will login you system and check it for you。
Hi, restarting only asterisk is useless. In trixbox I have to issue:
amportal stop
mISDN stop
and then
mISDN start
amportal start
and it starts functioning again without reboot.
Asterisk is 1.6 on trixbox 2.8.0.3
Card is b100p.
As about ssh I'll let you know.
Thank you for your interest in helping me.
Hi:
There is a link, maybe it can help you.
https://issues.asterisk.org/view.php?id=9449
You can send you SSH to me: This email address is being protected from spambots. You need JavaScript enabled to view it. . If possible, please add my MSN: This email address is being protected from spambots. You need JavaScript enabled to view it. .