It`s great. we find out solution, and make outgoing call. Thank you!
So, we have 3 extensions (101, 102, 103) and 8 GSM numbers.
It would be necessary for us that any of 8 GSM numbers transfer randomly to any of 3 extension numbers.
wich changes me must done in this configuration
Right here, the "s" means "start", and the "n" means "next".
The meaning of the whole context is that asterisk will try to search the correct context( from-gsm is the context name), then it will perform the corresponding dialplan once it manages to get it.
exten => s, 1, Answer(), // asterisk starts to receive the incoming call and perform an Answer action.
exten => s, n, Dial(SIP/101). // asterisk will route the incoming call and specify the extension 101 to receive it.
GSM Cards are working perfectly.!!
Now i am starting to configure DE115P Cards. I Have a channel from Provider. short phone number is 923. When i dial 923 from my home phone. Ist always show The Line is Busy and In Asterisk CLI* I sow some text. After it i Tryed to change some config files. After it in CLI mode nothing to show. A try to find instruction about, how to configure DE115P in asterisk, but cannot find.
I just need to find the way, i need a first step. Thank you very much!
I think that i do something wrong. We have a RAD modem (see picture
http://webobjects2.cdw.com/is/image/CDW/1544477?
$product_230$ )
We have a E1 line from provider. today i see that E1 SYNC indicator lighting Red =(((
I Think that some config files was configured incorrectly. the little lamp theres is ethernet cable from modem entering to the DE115 card is not lighting.
How can i reset all parameters to this card to default? =((( Or may be u can connect to server via SSH or HTTP and check parametrs. I can give you SSH again. (root pass some times ago was changed)
Thank you for your assistance.! I Am currently online now. If you have SKYPE we can talk in skype.